Expired Offers
- High ToughnessAnycubic PLA Plus 3D Printer Filament is developed with high toughness and certain impact resistance, not easy to break when subjected to external force. At the same time prints smoothly with few layers, suitable for making models of handicrafts, artworks, engineering parts, and so on.
- High Dimensional AccuracyThe winding of Anycubic PLA Plus 3D Filament 1.75mm is tidy and maintains dimensional stability, with a controlled wire diameter tolerance of 0.02 mm. Its high precision and minimal shrinkage work together to prevent cracks and warping.
- No Clogging, No bubblesWithout any clogging or bubbles, Anycubic PLA Plus Filament guarantees a seamless extrusion of filament, resulting in a refined and consistent finish for the completed model.
- Without Tangle HasslesAnycubic 3D Printing PLA Plus Filament is without tangle hassles on the roll and easily left the spool without crossing turns which can result in less thread pulling and twisting, no clogging. Besides, it can easily lock the filament after use.
- High CompatibilityEnsuring compatibility with most of FDM 3D printers and 3D printing pens available in the market. Our vacuum packaging effectively shields against moisture and dust, ensuring an enhanced printing experience.
- Model: HPLP03-101-2-1123-US
-
Published 5/2/2024
Verified 5/6/2024 -
Popularity: 1/5
- RFID Filament Enhanced Smart PrintingThe Anycubic Color Engine Pro precisely detects RFID filaments, automatically optimizing printer settings for the best results. No more tedious and complicated setup adjustments, ensures precise execution of every print job and minimizes filament wastage. Just load the filaments and start printing. This feature is only applicable to the Anycubic Kobra 3 Combo 3D Printer.
- Accuracy & Consistency Anycubic 3D Printer PLA filament of 1.75mm diameter, Minimum dimensional tolerance 0.02mm, which makes filament outflow smoother, came out homogeneous. The low shrinkage and stable printing dimensions make the fusion between the layers very good to obtain an even better-bridging result. You don't worry the diameter changes a lot then the feed rate is disrupted with thicker and thinner layers at all.
- Neat Spool & Premium Quality The 3D Printing PLA filament was neat on the roll and easily left the spool without crossing turns. Resulting in less thread pulling and twisting, no clogging, and super under-extruding. It produces the cleanest, least stringing prints of any of the filaments you have used while resisting warping and providing the glossiest finish. Without a single jam and adhesion issue which meets your demands for printing freely.
- Clog-Free & Bubble-Free Designed and Manufactured with a Clog-Free patent to guarantee a smooth and stable printing experience with our PLA refills. Completely dried for 24 hours before packaging and vacuum sealed with desiccants in nylon re-bag enable much smoother and more stable printing. The larger spool inner diameter design makes feeding smoother.
- For Most 3D PrintersThe Anycubic Filament offers great compatibility with a wide range of temperatures and printing speeds, making it suitable for mainstream printers available on the market.
- Model: AHPLGY-102-US-060
Verified: 07/26/2024 · Free Shipping
- :It has the advantages of no clogging, no bubbles, no tangles, no warpage, no drawing, easy to use, and the threads are neatly arranged, which effectively reduces the risk of knotting.
- : ANYCUBIC PLA filament is made of starch raw materials extracted from renewable plant resources (such as corn, cassava, etc.), which is a new type of environmentally material
- .: dimensional accuracy +/- 0.02mm to ensure even and smooth wire output. Anycubic filament has wide compatibility due to its small diameter error, and is suitable for almost all 1.75mm FDM 3D printers
- : When installing and replacing consumables, it is necessary to heat the print head (heated above 200C), otherwise the 3D printer will be easily damaged. Recommended printing temperature is 200-210 nozzle/extrusion temperature
- : completely dry for 24 hours before packaging, and vacuum seal with desiccant in a re-sealable nylon bag. Compared with ABS filament, PLA is less likely to deform (this makes printing easier)
- Model: HPLGY-10-2-US1227
Verified: 07/27/2024 · Free Shipping
It's $2 under list price. Buy Now at Amazon
- & A silky touch and a long-lasting shiny glow with fewer visible layer lines, leaving a soft touch and an astonishing look to all your prints. The 3D Printing Silk PLA filament was neat on the roll and left the spool easily without any crossed turns
- & Anycubic 3D Printer PLA filament of 1.75mm diameter, Minimum dimensional tolerance 0.02mm, which makes filament outflow smoother, came out homogeneous. The low shrinkage and stable printing dimensions make the fusion between the layers very good to obtain an even better-bridging result. You don't worry the diameter changes a lot then the feed rate is disrupted with thicker and thinner layers at all
- - & - Designed and Manufactured with a Clog-Free patent to guarantee a smooth and stable printing experience with our PLA refills. Completely dried for 24 hours before packaging and vacuum sealed with desiccants in nylon re-bag enable much smoother and more stable printing. The larger spool inner diameter design makes feeding smoother
- - & Made from starch raw materials derived from renewable plant resources, PLA filament boasts lower melting temperatures and even does not need a heated bed. No odor, no pollution, and non-toxic during printing. Anycubic PLA Filament Compatible perfectly with most FDM 3D Printers and 3D Pens that use 1.75MM filament on the market
- 1. Install the spool on the spool holder of a 3D printer, and preheat the nozzle of the 3D printer. 2. Cut the filament tip diagonally, and guide it through the extruder and feeding tube. 3. Manually push the filament through the feeding tube to the nozzle, until the filament melts through the nozzle. Note: When installing and changing filament, we highly suggest preheating the nozzle first to reduce the nozzle block risk
- Model: BR-PL031
Verified: 07/23/2024 · Save $2.41 off list · Free Shipping
It's $2 under list price. Buy Now at Amazon
- With a vibrant and vivid hue, the prints of Anycubic PETG 3D Printer Filament feature a smooth and delicate surface finish. They exhibit excellent clarity, appearing either semi-transparent or fully transparent when illuminated. This imparts a clear and aesthetically pleasing appearance to the models.
- Exceptional toughness and impact resistance ensure that the print model resists breakage even when subjected to bending or collision. Anycubic PETG Filament maintains outstanding performance over time, making it ideal for crafting mechanical parts, engineering models, and other structures exposed to mechanical stress.
- ., Without any clogging or bubbles, Anycubic PETG Filament 1.75mm guarantees a seamless extrusion of filament, resulting in a refined and consistent finish for the completed model. The winding is tidy and maintains dimensional stability, with a controlled wire diameter tolerance of 0.02 mm, ensuring compatibility with 99% of FDM 3D printers and 3D printing pens available in the market. Its high precision and minimal shrinkage work together to prevent cracks and warping.
- & Enhanced chemical and water resistance ensures stability even in high humidity environments, as well as in the presence of various chemicals and common cleaning agents. Additionally, Anycubic PETG Filament excellent adhesion guarantees a stronger and more reliable high success rate for printing.
- Anycbuic have carefully chosen eco-friendly and non-toxic imported materials. Our vacuum packaging effectively shields against moisture and dust, ensuring an enhanced printing experience.
- Model: HPEGY-102-2
Verified: 07/08/2024 · Save $2 off list · Free Shipping
- 30-600mm/s Printing SpeedWith enhanced fluidity, ELEGOO RAPID PLA+ filament melts rapidly and flows smoothly, allowing for up to 600mm/s fast printing speed. You can complete the projects quickly without compromising on quality
- Enhanced Strength & ToughnessELEGOO RAPID PLA plus filament features high flexural modulus and elongation at break, which makes it resistant to brittleness and cracking, bringing excellent results for printing functional parts
- Less-tangle & Neatly WoundFull mechanical winding and strict manual inspection ensures that all high-speed pla plus filaments are neatly wound, which effectively reduces tangles, snap and line breakage issues
- Top-Notch Accuracy & ConsistentPrecise production process guarantee the filament of 1.75mm diameter, accuracy of +/- 0.02mm. Strict tolerances and perfect dimensional accuracy ensure smooth and consistent feeding for filaments
- For Most 3D PrintersRapid PLA+ filament fit for both regular printers and high speed printers, perfectly for most high speed printer such as Neptune 4, Neptune 4 pro, K1, K1 Max, Ender 5 series, Kobra 2, M5, M5C and more
- Model: US-EL-3D-PH02
Verified: 07/26/2024 · Free Shipping
- TWO TONE MATTE PLA FILAMENT SPECS: 1 KG (approximately 2.20 lbs) Per Spool 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.03mm)
- DUAL COLOR MATTE PLA FILAMENT PRINT SETTINGS: Recommended Extrusion/Nozzle Temperature: 190C - 210C (374F - 410F) Recommended Bed Temperature: 60C -80C (140F - 176F) Spool Diameter: 8.81 in. (223.77 mm) - Spool Width: 2.81 in. (71.37 mm) - Spool Hub Hole Diameter: 2.00 in. (50.80 mm)
- INLAND MULTI COLOR MATTE PLA FILAMENT:. Matte PLA produces a printed surface that diffuses light, giving it a matte finish. The multicolor, matte finish helps to reduce the visibility of printed layer lines. Matte PLA is less brittle than normal PLA and prints in beautiful pastel colors.
- EASY-TO-USE CO-EXTRUDED FILAMENT: The Inland Matte PLA filament melts evenly and feeds smoothly into your 3D Printer creating defined corners with minimal warping and no odor. Produce your best print with our no-clog, bubble-free matte filaments. This Matte Filament is co-extruded, meaning every inch of the filament is two colors. You will get a multi colored 3D print, even when printing small objects.
- CARDBOARD SPOOL: Matte PLA filament is non-toxic and comes with a cardboard spool. To keep your filament tangle free do not let go of the filament on the spool! Always hold the spool and filament tightly, do not allow your filament to spring back. Inland filament can be used with most 1.75MM FDM and FFF 3D Printers. Your filament will arrive completely dried and vacuum sealed with desiccant to ensure a high-quality matte, multi-colored print
- Model: 532150
- UPC: 618996755424
Verified: 07/24/2024 · $15.99 after savings · Free Shipping
It's $6 under list price. Buy Now at Amazon
- AntiString 3D Printer Filament's TechnologySay goodbye to messy prints, experience a smooth and seamless printing process like never before using SUNLU APLA 3D Printer Filament, meeting all of your innovative needs.
- No Shrink & No stringingAchieve impeccable results every time with you,Unlike other filaments, our APLA 3D Printing Filament eliminates visible stringing, ensuring a flawless finish in your prints.
- Clog-Free & Bubble-FreeFull mechanical winding and strict manual examination, to make sure the line tidy and less-tangle, so as to avoid possible line breaking. 1.75 APLA filament is vacuum sealed packing with desiccants in a transparent bag, no bubble and easy to print.
- Beginner & Expert FriendlyThe AntiString PLA 3D Filament is compatible with most standard FDM 3D printers. It making it easy for novice users to get started with basic settings. Whether you're a professional designer or a DIY enthusiast, this filament guarantees outstanding results every time.
- About APLA FilamentAdvanced diameter measuring and self-adaptive control system in the manufacturing guarantee these 3D printer filaments of 1.75 mm diameter, Accuracy +/- 0.03 mm; 1 kg spool (2.2lbs)
- Recommend Settings- We recommend printing at a Nozzle/Extrusion temperature of 205C - 215C (401F - 419F) and Bed/Platform temperature of 50C - 65C (122F - 149F).
- NOTE - Please use glue on the print bed if you have a bed adhesion issue. Please pass the end of the filament into the hole after finishing printing to avoid being entangled.
- Model: SUNLU AntiString PLA 3D Printer Filament
Used 1 times · Verified: 07/22/2024 · Save $6.00 off list · Free Shipping
- Print Faster -SUNLU high-speed 3D printer PLA filament, designed to turbocharge your printing from slow to swift. Experience a colossal 500% increase in flowability, ensuring smooth printing even at speeds exceeding 250mm/s, without clogs or filament shortages. Bring your ideas to life with high-speed printing, on average, save 70% printing time.
- Efficient Cooling -High speed PLA filament boasts a 180% boost in heat dissipation, enabling quicker cooling and curing than regular PLA filament under the same conditions. This prevents 3d filament material buildup during fast prints, improving printing speed while also ensuring accuracy and mechanical performance.
- High Speed PLA Printing Tips -The average printing temp of SUNLU High Speed PLA filament is lower than regular PLA filament, saving time and energy consumption. As HS PLA Filament is temperature-sensitive, please set slicing parameters according to recommended print speed and temp matching based on your 3D printer. If stringing occurs, please reduce print temp appropriately.
- Clog-Free and Bubble-Free -SUNLU 3d printer PLA filament consistent diameter tolerance 1.75mm 0.02mm, ensuring tangle-free and knot-free. Rigorous 24-hour pre-packaging drying, plus vacuum-sealing, guarantees moisture-free printing, eliminating clogs and bubbles. Increase your printing success rate.
- After Sales Guarantee -SUNLU, founded in 2013, is a high-tech company dedicated to research and development, production and sales of 3D printing filaments, 3D printers and various 3D printing materials such as PLA, PETG, 3d resin etc. We are committed to making ongoing and exceptional contributions to the 3D printing industry.
- Model: HSPLA-WT-1KG-A
Verified: 07/23/2024 · $13.99 after savings · Free Shipping
It's $661 under list price. Buy Now at Amazon
- System: AMD Ryzen 5 7600 3.8GHz 6+12 Cores | AMD A620 Chipset | 16GB DDR5 | 500GB PCIe Gen4 NVMe SSD | Genuine Windows 11 Home 64-bit
- Graphics: NVIDIA GeForce RTX 4060 8GB Video Card | 1x HDMI | 2x DisplayPort
- Connectivity: 6 x USB 3.1 | 2 x USB 2.0 | 1x RJ-45 Network Ethernet 10/100/1000 | 802.11AC Wi-Fi | Audio: 7.1 Channel | Keyboard and mouse
- Special feature: Tempered glass side case panel | Custom RGB case lighting | 7 colors gaming mouse
- 1 Year Parts & Labor Warranty, Free Lifetime Tech Support
- Model: GMA2700A
- UPC: 811842079013
Verified: 07/27/2024 · Save $660.99 off list
- Proven reliable Stabila technology
- Lightweight construction at just 0.57 Kgs
- High performace for the home or tradesman
- Model: 19166
It's $23 under list price. Buy Now at Amazon
- MULTIPURPOSE: This Sorbus 5 Drawer Bedroom Dresser can be used as an end table, side table, or bedside table to store clothes, blankets, crafts, linens, baby clothes, lingerie, purses, scarves, socks, accessories, gadgets, toiletries, makeup, hair/beauty, cosmetics, office supplies, toys, games, Books, paperwork, knitting supplies, and more
- STURDY & DURABLE DESIGN: The Sorbus Chest of Drawers is easy to clean and features a sturdy steel frame, 2 layers of non-woven fabric drawers, durable wooden handles, and a wooden water-proof top
- STYLISH & SIMPLE: The Sorbus Wide Chest of Drawers complements many dcor styles and aesthetics, whether traditional, rustic, or modern - Can be used for storage in the bedroom, office, living room, hallway, kids' room, guest room, closet, nursery, college dorm, small apartment solutions & more
- SPACIOUS STORAGE: This long bedroom dresser features 5 fabric drawers, offering large storage space for nighttime necessities - Each drawer is approximately 8.45 inches deep - The MDF wood top features a smooth beige finish - Ideal for displaying a TV, alarm clock, phone, charger, eyeglasses, and more
- EASY ASSEMBLY: Put your Sorbus TV Stand with Storage together in minutes so you can organize your home right away - Assembly hardware, instructions, and mounting hardware included - Dresser measures 39.50 L x 11.87 W x 24.62 H -Square drawers measure 11.8x11x8.46 in, Rectangular drawers measure 18.11x11x8.46 in
- Model: DRW-CU5-GRYBLK
- UPC: 192405025839
Used 1 times · Verified: 07/19/2024 · Save $23.00 off list · Free Shipping
It's $24 under list price. Buy Now at Amazon
- No Assemble needed: The zero gravity chairs come fully assembled and folded of the zero gravity recliner. The only thing you need to do is getting them out of the boxes. Then you can use them and will have a nice nap.
- Comfortable Zero Gravity Chairs: Homall Zero Gravity Chairs are very comfortable for people who want to camp with motor house, take a vacation on the beach or rest beside the poolside. That would be a good choice for you to have a break with Homall Zero Gravity Chairs.
- Durable and High-Quality: This Homall Zero Gravity Recliner is sturdy enough to hold people up to 300lbs. Strong double bungee rope and steel tube frame are durable for using a long time. Full padded detachable pillow can be adjusted according to your comfort. Breathable fabric offer a cool experience in a hot summer day.
- Lockable Recliner System: It can be adjusted at any angle from 0 to 145 degrees. Smoothly glides to an ergonomic zero-gravity position, with replaceable elastic cords that immediately adjust to your body.
- Applicable Places: This Homall zero gravity chair is suitable for poolside, lawn, garden, patio, backyard and so on. It will bring you a more comfortable experience to have a rest at the leisure time.
- Model: 5CBD
- UPC: 810036631716
Used 2 times · Verified: 07/26/2024 · Save $23.50 off list
It's $5 under list price. Buy Now at Amazon
- High ToughnessAnycubic PLA Plus 3D Printer Filament is developed with high toughness and certain impact resistance, not easy to break when subjected to external force. At the same time prints smoothly with few layers, suitable for making models of handicrafts, artworks, engineering parts, and so on.
- High Dimensional AccuracyThe winding of Anycubic PLA Plus 3D Filament 1.75mm is tidy and maintains dimensional stability, with a controlled wire diameter tolerance of 0.02 mm. Its high precision and minimal shrinkage work together to prevent cracks and warping.
- No Clogging, No bubblesWithout any clogging or bubbles, Anycubic PLA Plus Filament guarantees a seamless extrusion of filament, resulting in a refined and consistent finish for the completed model.
- Without Tangle HasslesAnycubic 3D Printing PLA Plus Filament is without tangle hassles on the roll and easily left the spool without crossing turns which can result in less thread pulling and twisting, no clogging. Besides, it can easily lock the filament after use.
- High CompatibilityEnsuring compatibility with most of FDM 3D printers and 3D printing pens available in the market. Our vacuum packaging effectively shields against moisture and dust, ensuring an enhanced printing experience.
- Model: FBA-AU-GMUS-HPLPBK-101
Verified: 07/22/2024 · Save $5.00 off list · Free Shipping
It's $2 under list price. Buy Now at Amazon
- :It has the advantages of no clogging, no bubbles, no tangles, no warpage, no drawing, easy to use, and the threads are neatly arranged, which effectively reduces the risk of knotting.
- : ANYCUBIC PLA filament is widely compatible with all FDM 3D printers on the market.
- .: dimensional accuracy +/- 0.02mm to ensure even and smooth wire output. Anycubic filament has wide compatibility due to its small diameter error, and is suitable for almost all 1.75mm FDM 3D printers
- : When installing and replacing consumables, it is necessary to heat the print head (heated above 200C), otherwise the 3D printer will be easily damaged. Recommended printing temperature is 200-210 nozzle/extrusion temperature
- : completely dry for 24 hours before packaging, and vacuum seal with desiccant in a re-sealable nylon bag. Compared with ABS filament, PLA is less likely to deform (this makes printing easier)
- Model: GMUS-HPLGY
Verified: 07/23/2024 · Save $2 off list · Free Shipping
It's $7 under list price. Buy Now at Amazon
- & Anycubic 3D Printer PLA filament of 1.75mm diameter, Minimum dimensional tolerance 0.02mm, which makes filament outflow smoother, came out homogeneous. The low shrinkage and stable printing dimensions make the fusion between the layers very good to obtain an even better-bridging result. You don't worry the diameter changes a lot then the feed rate is disrupted with thicker and thinner layers at all
- & The 3D Printing PLA filament was neat on the roll and easily left the spool without crossing turns. Resulting in less thread pulling and twisting, no clogging, and super under-extruding. It produces the cleanest, least stringing prints of any of the filaments you have used while resisting warping and providing the glossiest finish. Without a single jam and adhesion issue which meets your demands for printing freely
- - & - Designed and Manufactured with a Clog-Free patent to guarantee a smooth and stable printing experience with our PLA refills. Completely dried for 24 hours before packaging and vacuum sealed with desiccants in nylon re-bag enable much smoother and more stable printing. The larger spool inner diameter design makes feeding smoother
- - & Made from starch raw materials derived from renewable plant resources, PLA filament boasts lower melting temperatures and even does not need a heated bed. No odor, no pollution, and non-toxic during printing. Anycubic PLA Filament Compatible perfectly with most FDM 3D Printers and 3D Pens that use 1.75MM filament on the market
- 1. Install the spool on the spool holder of a 3D printer, and preheat the nozzle of the 3D printer. 2. Cut the filament tip diagonally, and guide it through the extruder and feeding tube. 3. Manually push the filament through the feeding tube to the nozzle, until the filament melts through the nozzle. Note: When installing and changing filament, we highly suggest preheating the nozzle first to reduce the nozzle block risk
- Model: FBA-AU-GMUS-HPLBK-104-2
Verified: 07/27/2024 · Save $7.00 off list · Free Shipping
It's $4 under list price. Buy Now at Amazon
- :It has the advantages of no clogging, no bubbles, no tangles, no warpage, no drawing, easy to use, and the threads are neatly arranged, which effectively reduces the risk of knotting.
- : ANYCUBIC PLA filament is made of starch raw materials extracted from renewable plant resources (such as corn, cassava, etc.), which is a new type of environmentally material
- .: dimensional accuracy +/- 0.02mm to ensure even and smooth wire output. Anycubic filament has wide compatibility due to its small diameter error, and is suitable for almost all 1.75mm FDM 3D printers
- : When installing and replacing consumables, it is necessary to heat the print head (heated above 200C), otherwise the 3D printer will be easily damaged. Recommended printing temperature is 200-210 nozzle/extrusion temperature
- : completely dry for 24 hours before packaging, and vacuum seal with desiccant in a re-sealable nylon bag. Compared with ABS filament, PLA is less likely to deform (this makes printing easier)
- Model: HPLBK-10-US1227
- UPC: 605175686617
Alerts
Edit Alert-
Enable alerts for this product
Price Analysis
  | Discount | Last Deal Price | Current Price |   |
---|---|---|---|---|
Amazon |   | $40 (exp 1 mo ago) | -- | Check Price |
Sign In or Register