![ANYCUBIC PLA Filament 1.75mm Bundle, 3D Printing PLA Filament 1.75mm Dimensional Accuracy +/- for $30 ANYCUBIC PLA Filament 1.75mm Bundle, 3D Printing PLA Filament 1.75mm Dimensional Accuracy +/- for $30](https://c.dlnws.com/image/upload/c_lpad,dpr_auto,f_auto,h_300,q_auto:low,w_300/content/lp622qd7am0ahvzjwiwu.jpg)
It's $6 under list price. Buy Now at Amazon
- & Anycubic 3D Printer PLA filament of 1.75mm diameter, Minimum dimensional tolerance 0.02mm, which makes filament outflow smoother, came out homogeneous. The low shrinkage and stable printing dimensions make the fusion between the layers very good to obtain an even better-bridging result. You don't worry the diameter changes a lot then the feed rate is disrupted with thicker and thinner layers at all
- & The 3D Printing PLA filament was neat on the roll and easily left the spool without crossing turns. Resulting in less thread pulling and twisting, no clogging, and super under-extruding. It produces the cleanest, least stringing prints of any of the filaments you have used while resisting warping and providing the glossiest finish. Without a single jam and adhesion issue which meets your demands for printing freely
- - & - Designed and Manufactured with a Clog-Free patent to guarantee a smooth and stable printing experience with our PLA refills. Completely dried for 24 hours before packaging and vacuum sealed with desiccants in nylon re-bag enable much smoother and more stable printing. The larger spool inner diameter design makes feeding smoother
- - & Made from starch raw materials derived from renewable plant resources, PLA filament boasts lower melting temperatures and even does not need a heated bed. No odor, no pollution, and non-toxic during printing. Anycubic PLA Filament Compatible perfectly with most FDM 3D Printers and 3D Pens that use 1.75MM filament on the market
- 1. Install the spool on the spool holder of a 3D printer, and preheat the nozzle of the 3D printer. 2. Cut the filament tip diagonally, and guide it through the extruder and feeding tube. 3. Manually push the filament through the feeding tube to the nozzle, until the filament melts through the nozzle. Note: When installing and changing filament, we highly suggest preheating the nozzle first to reduce the nozzle block risk
- Model: FBA-AU-GMUS-HPLGY-104-2
-
Published 5/14/2024
Verified 7/26/2024 -
Popularity: 1/5
![ANYCUBIC PLA 3D Printer Filament, RFID 3D Printing PLA Filament 1.75mm Dimensional Accuracy +/- for $16 ANYCUBIC PLA 3D Printer Filament, RFID 3D Printing PLA Filament 1.75mm Dimensional Accuracy +/- for $16](https://c.dlnws.com/image/upload/c_lpad,dpr_auto,f_auto,h_300,q_auto:low,w_300/content/enmrpbsoktgezuucoce0.jpg)
- RFID Filament Enhanced Smart PrintingThe Anycubic Color Engine Pro precisely detects RFID filaments, automatically optimizing printer settings for the best results. No more tedious and complicated setup adjustments, ensures precise execution of every print job and minimizes filament wastage. Just load the filaments and start printing. This feature is only applicable to the Anycubic Kobra 3 Combo 3D Printer.
- Accuracy & Consistency Anycubic 3D Printer PLA filament of 1.75mm diameter, Minimum dimensional tolerance 0.02mm, which makes filament outflow smoother, came out homogeneous. The low shrinkage and stable printing dimensions make the fusion between the layers very good to obtain an even better-bridging result. You don't worry the diameter changes a lot then the feed rate is disrupted with thicker and thinner layers at all.
- Neat Spool & Premium Quality The 3D Printing PLA filament was neat on the roll and easily left the spool without crossing turns. Resulting in less thread pulling and twisting, no clogging, and super under-extruding. It produces the cleanest, least stringing prints of any of the filaments you have used while resisting warping and providing the glossiest finish. Without a single jam and adhesion issue which meets your demands for printing freely.
- Clog-Free & Bubble-Free Designed and Manufactured with a Clog-Free patent to guarantee a smooth and stable printing experience with our PLA refills. Completely dried for 24 hours before packaging and vacuum sealed with desiccants in nylon re-bag enable much smoother and more stable printing. The larger spool inner diameter design makes feeding smoother.
- For Most 3D PrintersThe Anycubic Filament offers great compatibility with a wide range of temperatures and printing speeds, making it suitable for mainstream printers available on the market.
- Model: AHPLGY-102-US-060
Verified: 07/26/2024 · Free Shipping
![ANYCUBIC 3D Printer Filament PLA 1.75mm Bundle, FDM Printer Filament 1kg Spool (2.2 lbs), for $29 ANYCUBIC 3D Printer Filament PLA 1.75mm Bundle, FDM Printer Filament 1kg Spool (2.2 lbs), for $29](https://c.dlnws.com/image/upload/c_lpad,dpr_auto,f_auto,h_300,q_auto:low,w_300/content/vvybzr868jmftkawkyyj.jpg)
- :It has the advantages of no clogging, no bubbles, no tangles, no warpage, no drawing, easy to use, and the threads are neatly arranged, which effectively reduces the risk of knotting.
- : ANYCUBIC PLA filament is made of starch raw materials extracted from renewable plant resources (such as corn, cassava, etc.), which is a new type of environmentally material
- .: dimensional accuracy +/- 0.02mm to ensure even and smooth wire output. Anycubic filament has wide compatibility due to its small diameter error, and is suitable for almost all 1.75mm FDM 3D printers
- : When installing and replacing consumables, it is necessary to heat the print head (heated above 200C), otherwise the 3D printer will be easily damaged. Recommended printing temperature is 200-210 nozzle/extrusion temperature
- : completely dry for 24 hours before packaging, and vacuum seal with desiccant in a re-sealable nylon bag. Compared with ABS filament, PLA is less likely to deform (this makes printing easier)
- Model: HPLGY-10-2-US1227
Verified: 07/27/2024 · Free Shipping
![ANYCUBIC Silk Filament, Clog-Free Shiny 3D Printing PLA Filament 1.75mm Dimensional Accuracy +/- for $14 ANYCUBIC Silk Filament, Clog-Free Shiny 3D Printing PLA Filament 1.75mm Dimensional Accuracy +/- for $14](https://c.dlnws.com/image/upload/c_lpad,dpr_auto,f_auto,h_300,q_auto:low,w_300/content/ivxdkdxhc7x0ir8ga3kl.jpg)
It's $2 under list price. Buy Now at Amazon
- & A silky touch and a long-lasting shiny glow with fewer visible layer lines, leaving a soft touch and an astonishing look to all your prints. The 3D Printing Silk PLA filament was neat on the roll and left the spool easily without any crossed turns
- & Anycubic 3D Printer PLA filament of 1.75mm diameter, Minimum dimensional tolerance 0.02mm, which makes filament outflow smoother, came out homogeneous. The low shrinkage and stable printing dimensions make the fusion between the layers very good to obtain an even better-bridging result. You don't worry the diameter changes a lot then the feed rate is disrupted with thicker and thinner layers at all
- - & - Designed and Manufactured with a Clog-Free patent to guarantee a smooth and stable printing experience with our PLA refills. Completely dried for 24 hours before packaging and vacuum sealed with desiccants in nylon re-bag enable much smoother and more stable printing. The larger spool inner diameter design makes feeding smoother
- - & Made from starch raw materials derived from renewable plant resources, PLA filament boasts lower melting temperatures and even does not need a heated bed. No odor, no pollution, and non-toxic during printing. Anycubic PLA Filament Compatible perfectly with most FDM 3D Printers and 3D Pens that use 1.75MM filament on the market
- 1. Install the spool on the spool holder of a 3D printer, and preheat the nozzle of the 3D printer. 2. Cut the filament tip diagonally, and guide it through the extruder and feeding tube. 3. Manually push the filament through the feeding tube to the nozzle, until the filament melts through the nozzle. Note: When installing and changing filament, we highly suggest preheating the nozzle first to reduce the nozzle block risk
- Model: BR-PL031
Verified: 07/23/2024 · Save $2.41 off list · Free Shipping
![ANYCUBIC PETG Filament 1.75mm, 3D Printer Filament, Dimensional Accuracy +/- 0.02mm, Exceptional for $33 ANYCUBIC PETG Filament 1.75mm, 3D Printer Filament, Dimensional Accuracy +/- 0.02mm, Exceptional for $33](https://c.dlnws.com/image/upload/c_lpad,dpr_auto,f_auto,h_300,q_auto:low,w_300/content/lz5kz64nwbt8jmfsbjve.jpg)
It's $2 under list price. Buy Now at Amazon
- With a vibrant and vivid hue, the prints of Anycubic PETG 3D Printer Filament feature a smooth and delicate surface finish. They exhibit excellent clarity, appearing either semi-transparent or fully transparent when illuminated. This imparts a clear and aesthetically pleasing appearance to the models.
- Exceptional toughness and impact resistance ensure that the print model resists breakage even when subjected to bending or collision. Anycubic PETG Filament maintains outstanding performance over time, making it ideal for crafting mechanical parts, engineering models, and other structures exposed to mechanical stress.
- ., Without any clogging or bubbles, Anycubic PETG Filament 1.75mm guarantees a seamless extrusion of filament, resulting in a refined and consistent finish for the completed model. The winding is tidy and maintains dimensional stability, with a controlled wire diameter tolerance of 0.02 mm, ensuring compatibility with 99% of FDM 3D printers and 3D printing pens available in the market. Its high precision and minimal shrinkage work together to prevent cracks and warping.
- & Enhanced chemical and water resistance ensures stability even in high humidity environments, as well as in the presence of various chemicals and common cleaning agents. Additionally, Anycubic PETG Filament excellent adhesion guarantees a stronger and more reliable high success rate for printing.
- Anycbuic have carefully chosen eco-friendly and non-toxic imported materials. Our vacuum packaging effectively shields against moisture and dust, ensuring an enhanced printing experience.
- Model: HPEGY-102-2
Verified: 07/08/2024 · Save $2 off list · Free Shipping
![Inland Dual Color Matte Filament - Yellow to Red Color Change Filament - Two Color Matte PLA 3D for $16 Inland Dual Color Matte Filament - Yellow to Red Color Change Filament - Two Color Matte PLA 3D for $16](https://c.dlnws.com/image/upload/c_lpad,dpr_auto,f_auto,h_300,q_auto:low,w_300/content/gsaaowhrass0mndagi75.jpg)
- TWO TONE MATTE PLA FILAMENT SPECS: 1 KG (approximately 2.20 lbs) Per Spool 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.03mm)
- DUAL COLOR MATTE PLA FILAMENT PRINT SETTINGS: Recommended Extrusion/Nozzle Temperature: 190C - 210C (374F - 410F) Recommended Bed Temperature: 60C -80C (140F - 176F) Spool Diameter: 8.81 in. (223.77 mm) - Spool Width: 2.81 in. (71.37 mm) - Spool Hub Hole Diameter: 2.00 in. (50.80 mm)
- INLAND MULTI COLOR MATTE PLA FILAMENT:. Matte PLA produces a printed surface that diffuses light, giving it a matte finish. The multicolor, matte finish helps to reduce the visibility of printed layer lines. Matte PLA is less brittle than normal PLA and prints in beautiful pastel colors.
- EASY-TO-USE CO-EXTRUDED FILAMENT: The Inland Matte PLA filament melts evenly and feeds smoothly into your 3D Printer creating defined corners with minimal warping and no odor. Produce your best print with our no-clog, bubble-free matte filaments. This Matte Filament is co-extruded, meaning every inch of the filament is two colors. You will get a multi colored 3D print, even when printing small objects.
- CARDBOARD SPOOL: Matte PLA filament is non-toxic and comes with a cardboard spool. To keep your filament tangle free do not let go of the filament on the spool! Always hold the spool and filament tightly, do not allow your filament to spring back. Inland filament can be used with most 1.75MM FDM and FFF 3D Printers. Your filament will arrive completely dried and vacuum sealed with desiccant to ensure a high-quality matte, multi-colored print
- Model: 532150
- UPC: 618996755424
Verified: 07/24/2024 · $15.99 after savings · Free Shipping
![ELEGOO High Speed PLA+ Filament 1.75mm White 1KG, Rapid PLA Plus 3D Printer Filament Tough and High for $16 ELEGOO High Speed PLA+ Filament 1.75mm White 1KG, Rapid PLA Plus 3D Printer Filament Tough and High for $16](https://c.dlnws.com/image/upload/c_lpad,dpr_auto,f_auto,h_300,q_auto:low,w_300/content/khkm8i2n1wt7rt2p5ezg.jpg)
- 30-600mm/s Printing SpeedWith enhanced fluidity, ELEGOO RAPID PLA+ filament melts rapidly and flows smoothly, allowing for up to 600mm/s fast printing speed. You can complete the projects quickly without compromising on quality
- Enhanced Strength & ToughnessELEGOO RAPID PLA plus filament features high flexural modulus and elongation at break, which makes it resistant to brittleness and cracking, bringing excellent results for printing functional parts
- Less-tangle & Neatly WoundFull mechanical winding and strict manual inspection ensures that all high-speed pla plus filaments are neatly wound, which effectively reduces tangles, snap and line breakage issues
- Top-Notch Accuracy & ConsistentPrecise production process guarantee the filament of 1.75mm diameter, accuracy of +/- 0.02mm. Strict tolerances and perfect dimensional accuracy ensure smooth and consistent feeding for filaments
- For Most 3D PrintersRapid PLA+ filament fit for both regular printers and high speed printers, perfectly for most high speed printer such as Neptune 4, Neptune 4 pro, K1, K1 Max, Ender 5 series, Kobra 2, M5, M5C and more
- Model: US-EL-3D-PH02
Verified: 07/26/2024 · Free Shipping
![SUNLU PLA 3D Printer Filament, No String PLA Filament 1.75mm, Neatly Wound AntiString PLA 3D for $13 SUNLU PLA 3D Printer Filament, No String PLA Filament 1.75mm, Neatly Wound AntiString PLA 3D for $13](https://c.dlnws.com/image/upload/c_lpad,dpr_auto,f_auto,h_300,q_auto:low,w_300/content/tcegacd4wriy6qaboepf.jpg)
It's $6 under list price. Buy Now at Amazon
- AntiString 3D Printer Filament's TechnologySay goodbye to messy prints, experience a smooth and seamless printing process like never before using SUNLU APLA 3D Printer Filament, meeting all of your innovative needs.
- No Shrink & No stringingAchieve impeccable results every time with you,Unlike other filaments, our APLA 3D Printing Filament eliminates visible stringing, ensuring a flawless finish in your prints.
- Clog-Free & Bubble-FreeFull mechanical winding and strict manual examination, to make sure the line tidy and less-tangle, so as to avoid possible line breaking. 1.75 APLA filament is vacuum sealed packing with desiccants in a transparent bag, no bubble and easy to print.
- Beginner & Expert FriendlyThe AntiString PLA 3D Filament is compatible with most standard FDM 3D printers. It making it easy for novice users to get started with basic settings. Whether you're a professional designer or a DIY enthusiast, this filament guarantees outstanding results every time.
- About APLA FilamentAdvanced diameter measuring and self-adaptive control system in the manufacturing guarantee these 3D printer filaments of 1.75 mm diameter, Accuracy +/- 0.03 mm; 1 kg spool (2.2lbs)
- Recommend Settings- We recommend printing at a Nozzle/Extrusion temperature of 205C - 215C (401F - 419F) and Bed/Platform temperature of 50C - 65C (122F - 149F).
- NOTE - Please use glue on the print bed if you have a bed adhesion issue. Please pass the end of the filament into the hole after finishing printing to avoid being entangled.
- Model: SUNLU AntiString PLA 3D Printer Filament
Used 1 times · Verified: 07/22/2024 · Save $6.00 off list · Free Shipping
![SUNLU High Speed PLA Filament 1.75mm, 30mm/s - 600mm/s Print Range, High Flow Speedy 3D Printer PLA for $14 SUNLU High Speed PLA Filament 1.75mm, 30mm/s - 600mm/s Print Range, High Flow Speedy 3D Printer PLA for $14](https://c.dlnws.com/image/upload/c_lpad,dpr_auto,f_auto,h_300,q_auto:low,w_300/content/jbz40aqhkuwfgnl1s8q3.jpg)
- Print Faster -SUNLU high-speed 3D printer PLA filament, designed to turbocharge your printing from slow to swift. Experience a colossal 500% increase in flowability, ensuring smooth printing even at speeds exceeding 250mm/s, without clogs or filament shortages. Bring your ideas to life with high-speed printing, on average, save 70% printing time.
- Efficient Cooling -High speed PLA filament boasts a 180% boost in heat dissipation, enabling quicker cooling and curing than regular PLA filament under the same conditions. This prevents 3d filament material buildup during fast prints, improving printing speed while also ensuring accuracy and mechanical performance.
- High Speed PLA Printing Tips -The average printing temp of SUNLU High Speed PLA filament is lower than regular PLA filament, saving time and energy consumption. As HS PLA Filament is temperature-sensitive, please set slicing parameters according to recommended print speed and temp matching based on your 3D printer. If stringing occurs, please reduce print temp appropriately.
- Clog-Free and Bubble-Free -SUNLU 3d printer PLA filament consistent diameter tolerance 1.75mm 0.02mm, ensuring tangle-free and knot-free. Rigorous 24-hour pre-packaging drying, plus vacuum-sealing, guarantees moisture-free printing, eliminating clogs and bubbles. Increase your printing success rate.
- After Sales Guarantee -SUNLU, founded in 2013, is a high-tech company dedicated to research and development, production and sales of 3D printing filaments, 3D printers and various 3D printing materials such as PLA, PETG, 3d resin etc. We are committed to making ongoing and exceptional contributions to the 3D printing industry.
- Model: HSPLA-WT-1KG-A
Verified: 07/23/2024 · $13.99 after savings · Free Shipping
![Sceptre 30-inch IPS Monitor 21:9 DisplayPort x2 up to 210Hz 1ms Ultra Wide/Slim Build-in Speakers, for $180 Sceptre 30-inch IPS Monitor 21:9 DisplayPort x2 up to 210Hz 1ms Ultra Wide/Slim Build-in Speakers, for $180](https://c.dlnws.com/image/upload/c_lpad,dpr_auto,f_auto,h_300,q_auto:low,w_300/content/grpe2foonvy8xwlrvbey.jpg)
It's $20 under list price. Buy Now at Amazon
- DP x2 up to 210Hz: Seamlessly link your devices to our two DisplayPort providing up to 210Hz refresh rate and two HDMI ports up to 190Hz, ensuring not only versatile connectivity but also a buttery-smooth visual experience for both work and play.
- True to Life Colors: Experience vibrant and true-to-life colors with a high quality IPS (In-Plane Switching) panel rated at 100% sRGB color gamut performance, ensuring accurate and stunning visuals for all your creative and multimedia tasks.
- Easy on the eyes: Protect your eyes and enhance your comfort with Blue-Light Shift technology. This feature reduces harmful blue light emissions from your screen, helping to alleviate eye strain during long hours of use and promoting healthier viewing habits.
- Enhanced Gaming Experience: Elevate your gaming prowess with a lightning-fast 1ms BR (Blur Reduction) and an ultra-smooth 210Hz refresh rate. Enjoy unparalleled responsiveness and seamless visuals redefining your gaming experience.
- Build-in Speakers: Whether you're at work or in the midst of an intense gaming session, our built-in speakers provide rich and seamless audio, all while keeping your desk clutter-free.
- Custom Gaming Modes: Experience enriched gaming with Sceptre's custom display settings tailored for gamers. Dive into the heart-pounding action of First Person Shooters (FPS) or master the strategic gameplay of Real-Time Strategy (RTS) titles, all optimized for peak performance on our monitor.
- Smooth GamePlay: Enhance your gaming experience with AMD FreeSync technology providing a tear-free, flicker-free gaming experience and smooth video playback
- Model: E305B-FU200T
- UPC: 792343330127
Verified: 07/23/2024 · Save $20 off list · Free Shipping
![CyberpowerPC Gamer Master Ryzen 5 Gaming Desktop w/ GeForce RTX 4060 for $399 CyberpowerPC Gamer Master Ryzen 5 Gaming Desktop w/ GeForce RTX 4060 for $399](https://c.dlnws.com/image/upload/c_lpad,dpr_auto,f_auto,h_300,q_auto:low,w_300/content/csoq1nxbmdr0vibfvm5r.jpg)
It's $661 under list price. Buy Now at Amazon
- System: AMD Ryzen 5 7600 3.8GHz 6+12 Cores | AMD A620 Chipset | 16GB DDR5 | 500GB PCIe Gen4 NVMe SSD | Genuine Windows 11 Home 64-bit
- Graphics: NVIDIA GeForce RTX 4060 8GB Video Card | 1x HDMI | 2x DisplayPort
- Connectivity: 6 x USB 3.1 | 2 x USB 2.0 | 1x RJ-45 Network Ethernet 10/100/1000 | 802.11AC Wi-Fi | Audio: 7.1 Channel | Keyboard and mouse
- Special feature: Tempered glass side case panel | Custom RGB case lighting | 7 colors gaming mouse
- 1 Year Parts & Labor Warranty, Free Lifetime Tech Support
- Model: GMA2700A
- UPC: 811842079013
Verified: 07/27/2024 · Save $660.99 off list
![nuLOOM 4x6 Ansley Moroccan Tassel Area Rug, Light Grey, High-Low Textured Bohemian Design, Plush for $35 nuLOOM 4x6 Ansley Moroccan Tassel Area Rug, Light Grey, High-Low Textured Bohemian Design, Plush for $35](https://c.dlnws.com/image/upload/c_lpad,dpr_auto,f_auto,h_300,q_auto:low,w_300/content/p0epdr3yptstp8nbzexd.jpg)
It's $25 under list price. Buy Now at Amazon
- Durable Materials: Our area rug is meticulously crafted from 100% Polyester and made in Turkey, ensuring exceptional quality. With this rugs power-loomed construction, you can trust in its durability.
- Recommended Rooms: Transform your living room, bedroom, kitchen, nursery, office, or dining room with this stunning 4x6 Area Rug. This rug is sure to elevate any space that it is placed in while blending seamlessly with any decor pieces.
- Stylish & Versatile Design: This Trellis rug boasts enduring, captivating aesthetics. Its Trellis pattern and unique prints bring a touch of flair to any room, ensuring lasting style in your living room, bedroom, or dining area.
- Premium Quality: This rug ensures durability and long-lasting beauty when placed in any high traffic area. This area rug was built to last for years to come while withstanding regular foot traffic from kids & pets making this the perfect decor piece.
- Ultra Soft Plush Shag Rug: The high pile of this area rug strikes a perfect balance between style and the ultimate cozy feeling underfoot. Our rug is extremely soft to the touch while being easy to maintain in your living room or bedroom.
- Versatile Size: This area rug measures 4x6 feet, making this rug the ideal choice for various room sizes and layouts. This rug makes the perfect centerpiece for your living room, bedroom, or dining room that could use an elevated touch.
- Kid and Pet-Friendly Rug: Worried about spills or messes? With this synthetic fiber design, this area rug is engineered to withstand the demands of a busy household from kids to pets, giving you peace of mind letting you relax and enjoy your new rug.
- Enhance with a Rug Pad: For added comfort and to extend the life of your rug, we recommend pairing it with one of our high-quality rug pads. It not only enhances the overall experience but also protects your flooring underneath.
- Stain-Resistant Durability: Keep your rug looking fresh and pristine effortlessly. Its stain-resistant properties make cleaning your area rug a breeze, allowing you to maintain its beauty with ease. Your new area rug will last for years to come!
- Rug Care Instructions: This area rug is extremely easy to maintain, simply vacuum your rug regularly and spot clean for lasting beauty. We recommend taking your rug to a professional cleaner as needed for any tough stains as needed.
- Model: KKLR12B-406
- UPC: 193981284672
Verified: 07/24/2024 · Save $25 off list · Free Shipping
![2020 Newest Samsung Chromebook 3 11.6 Inch Non-Touch Laptop| Intel Celeron N3060 up to 2.48 GHz| for $38 2020 Newest Samsung Chromebook 3 11.6 Inch Non-Touch Laptop| Intel Celeron N3060 up to 2.48 GHz| for $38](https://c.dlnws.com/image/upload/c_lpad,dpr_auto,f_auto,h_300,q_auto:low,w_300/content/kx4edkmpssndhrbjiv2o.jpg)
It's $411 under list price. Buy Now at Amazon
- 12.2" WUXGA FHD LED DisplayElevate your digital encounters and immerse yourself in a captivating virtual world like never before.You deserve to see more, and in rich, crystal clarity. With a 15.6" IPS touch screen in Full HD(1920 x 1080) boasts impressive color and clarity, you can do just that, no matter which mode you choose. IPS technology for wide viewing angles. Energy-efficient LED backlight.
- Intel Celeron Processor 3965YThe low voltage design optimizes energy usage, allowing you to stay productive and entertained with great efficiency.
- 4GB LPDDR4X RAM 320GB Storage4GB system memory for basic multitasking, Adequate high-bandwidth RAM to smoothly run multiple applications and browser tabs all at once. 64GB eMMC flash memory + 256GB Micro SD Card. This ultracompact memory system is ideal for mobile devices and applications, providing enhanced storage capabilities, streamlined data management, quick boot-up times and support for high-definition video playback.
- Ports & Accessories 1 USB3.0, 2 USB-C, MicroSD Multi-media Card Reader, 1 Headphone out/Mic-in ComboStereo Speakers1.5 W x 2, Internal Digital Dual Array Mic + Mono Mic. Built-in pen. 802.11 ac (2x2), Bluetooth v4.0. 128GB SnowBell USB Card.Island-type KeyboardTake your experiences to the big screen, and navigate intuitively with the keyboard and toucSamsungad.Intel HD Graphics 615Enjoy solid image quality that brings your everyday content to life with vibrant colors and sharp details.
- Chrome OSChromebook is a computer for the way the modern world works, with thousands of apps. Enjoy the seamless simplicity that comes with Google Chrome and Android apps, all integrated into one laptop. Its fast, simple, and secure. Accessory including: GM Mouse Pad for for Home, Student, Professionals, Small Business, School Education, and Commercial Enterprise, Online Class, Google Classroom, Remote Learning, Zoom Ready.
- Model: SAMSUNG
Verified: 07/26/2024 · Save $411.05 off list · Free Shipping
![ANYCUBIC PLA Plus (PLA+) 3D Printer Filament 1.75mm, High Toughness 3D Printing Filament, for $14 ANYCUBIC PLA Plus (PLA+) 3D Printer Filament 1.75mm, High Toughness 3D Printing Filament, for $14](https://c.dlnws.com/image/upload/c_lpad,dpr_auto,f_auto,h_300,q_auto:low,w_300/content/iiflnvpehbkvbqsxuxr8.jpg)
It's $5 under list price. Buy Now at Amazon
- High ToughnessAnycubic PLA Plus 3D Printer Filament is developed with high toughness and certain impact resistance, not easy to break when subjected to external force. At the same time prints smoothly with few layers, suitable for making models of handicrafts, artworks, engineering parts, and so on.
- High Dimensional AccuracyThe winding of Anycubic PLA Plus 3D Filament 1.75mm is tidy and maintains dimensional stability, with a controlled wire diameter tolerance of 0.02 mm. Its high precision and minimal shrinkage work together to prevent cracks and warping.
- No Clogging, No bubblesWithout any clogging or bubbles, Anycubic PLA Plus Filament guarantees a seamless extrusion of filament, resulting in a refined and consistent finish for the completed model.
- Without Tangle HasslesAnycubic 3D Printing PLA Plus Filament is without tangle hassles on the roll and easily left the spool without crossing turns which can result in less thread pulling and twisting, no clogging. Besides, it can easily lock the filament after use.
- High CompatibilityEnsuring compatibility with most of FDM 3D printers and 3D printing pens available in the market. Our vacuum packaging effectively shields against moisture and dust, ensuring an enhanced printing experience.
- Model: FBA-AU-GMUS-HPLPBK-101
Verified: 07/22/2024 · Save $5.00 off list · Free Shipping
![ANYCUBIC 3D Printer Filament PLA 1.75mm, FDM Printer Filament 1kg Spool (2.2 lbs), Dimensional for $13 ANYCUBIC 3D Printer Filament PLA 1.75mm, FDM Printer Filament 1kg Spool (2.2 lbs), Dimensional for $13](https://c.dlnws.com/image/upload/c_lpad,dpr_auto,f_auto,h_300,q_auto:low,w_300/content/kjj8iznqyjlafqqz7mdm.jpg)
It's $2 under list price. Buy Now at Amazon
- :It has the advantages of no clogging, no bubbles, no tangles, no warpage, no drawing, easy to use, and the threads are neatly arranged, which effectively reduces the risk of knotting.
- : ANYCUBIC PLA filament is widely compatible with all FDM 3D printers on the market.
- .: dimensional accuracy +/- 0.02mm to ensure even and smooth wire output. Anycubic filament has wide compatibility due to its small diameter error, and is suitable for almost all 1.75mm FDM 3D printers
- : When installing and replacing consumables, it is necessary to heat the print head (heated above 200C), otherwise the 3D printer will be easily damaged. Recommended printing temperature is 200-210 nozzle/extrusion temperature
- : completely dry for 24 hours before packaging, and vacuum seal with desiccant in a re-sealable nylon bag. Compared with ABS filament, PLA is less likely to deform (this makes printing easier)
- Model: GMUS-HPLGY
Verified: 07/23/2024 · Save $2 off list · Free Shipping
![ANYCUBIC PLA Filament 1.75mm Bundle, 3D Printing PLA Filament 1.75mm Dimensional Accuracy +/- for $30 ANYCUBIC PLA Filament 1.75mm Bundle, 3D Printing PLA Filament 1.75mm Dimensional Accuracy +/- for $30](https://c.dlnws.com/image/upload/c_lpad,dpr_auto,f_auto,h_300,q_auto:low,w_300/content/umvec8wamgmxav43wkpx.jpg)
It's $7 under list price. Buy Now at Amazon
- & Anycubic 3D Printer PLA filament of 1.75mm diameter, Minimum dimensional tolerance 0.02mm, which makes filament outflow smoother, came out homogeneous. The low shrinkage and stable printing dimensions make the fusion between the layers very good to obtain an even better-bridging result. You don't worry the diameter changes a lot then the feed rate is disrupted with thicker and thinner layers at all
- & The 3D Printing PLA filament was neat on the roll and easily left the spool without crossing turns. Resulting in less thread pulling and twisting, no clogging, and super under-extruding. It produces the cleanest, least stringing prints of any of the filaments you have used while resisting warping and providing the glossiest finish. Without a single jam and adhesion issue which meets your demands for printing freely
- - & - Designed and Manufactured with a Clog-Free patent to guarantee a smooth and stable printing experience with our PLA refills. Completely dried for 24 hours before packaging and vacuum sealed with desiccants in nylon re-bag enable much smoother and more stable printing. The larger spool inner diameter design makes feeding smoother
- - & Made from starch raw materials derived from renewable plant resources, PLA filament boasts lower melting temperatures and even does not need a heated bed. No odor, no pollution, and non-toxic during printing. Anycubic PLA Filament Compatible perfectly with most FDM 3D Printers and 3D Pens that use 1.75MM filament on the market
- 1. Install the spool on the spool holder of a 3D printer, and preheat the nozzle of the 3D printer. 2. Cut the filament tip diagonally, and guide it through the extruder and feeding tube. 3. Manually push the filament through the feeding tube to the nozzle, until the filament melts through the nozzle. Note: When installing and changing filament, we highly suggest preheating the nozzle first to reduce the nozzle block risk
- Model: FBA-AU-GMUS-HPLBK-104-2
Verified: 07/27/2024 · Save $7.00 off list · Free Shipping
![ANYCUBIC 3D Printer Filament PLA 1.75mm, FDM Printer Filament 1kg Spool (2.2 lbs), Dimensional for $13 ANYCUBIC 3D Printer Filament PLA 1.75mm, FDM Printer Filament 1kg Spool (2.2 lbs), Dimensional for $13](https://c.dlnws.com/image/upload/c_lpad,dpr_auto,f_auto,h_300,q_auto:low,w_300/content/a18q89dx8gs37nh302f3.jpg)
It's $4 under list price. Buy Now at Amazon
- :It has the advantages of no clogging, no bubbles, no tangles, no warpage, no drawing, easy to use, and the threads are neatly arranged, which effectively reduces the risk of knotting.
- : ANYCUBIC PLA filament is made of starch raw materials extracted from renewable plant resources (such as corn, cassava, etc.), which is a new type of environmentally material
- .: dimensional accuracy +/- 0.02mm to ensure even and smooth wire output. Anycubic filament has wide compatibility due to its small diameter error, and is suitable for almost all 1.75mm FDM 3D printers
- : When installing and replacing consumables, it is necessary to heat the print head (heated above 200C), otherwise the 3D printer will be easily damaged. Recommended printing temperature is 200-210 nozzle/extrusion temperature
- : completely dry for 24 hours before packaging, and vacuum seal with desiccant in a re-sealable nylon bag. Compared with ABS filament, PLA is less likely to deform (this makes printing easier)
- Model: HPLBK-10-US1227
- UPC: 605175686617
Alerts
Edit Alert-
Enable alerts for this product
Price Analysis
  | Discount | Last Deal Price | Current Price |   |
---|---|---|---|---|
Amazon | 16% | -- | $30 | Buy Now |
Sign In or Register