Amazon · 2 wks ago
$500
free shipping
more
↑ less
Features
- 4K+ HD Resolution, Anycubic Photon Mono X2 adopts 4096 x 2560 4K+ high resolution, ensures vivid reproduction of 3d model. Compared with ordinary RGB screen, the 9.1-inch monochrome screen not only prolongs the life of the screen, but also meets the printing needs of large-size models
- Uniform Light SourceEquipped with an improved ANYCUBIC Light Turbo matrix light source, it can project the UV light both parallel and perpendicular to the LCD screen, offering a much more uniform light exposure, thus improving the quality of 3d printing models.
- Dual Linear RailANYCUBIC Photon Mono X2 3d resin printer uses a dual linear rail and POM clearance nut combined with a vibration absorption structure to ensure z-axis operation accuracy and allow users to effectively eliminate layer lines.
- Great Slicer CompatibilityANYCUBIC resin 3d printer is fully compatible with ANYCUBIC Photon Workshop, Chitu and LycheeSlicer, support 8X anti-aliasing, very easy to use, bringing you a comfortable printing experience(this printer does not support Anycubic Cloud service).
- Laser Engraved Build PlateANYCUBIC Photon Mono X2 Resin 3D Printer adopts a laser-engraved build plate with textured checkerboard pattern, effectively increasing the adhesion of the model when printing and improving the success rate, making remove the model easier after printing. At the same time, anti-scratch film can reduce the screen damage caused by resin leakage and save the high cost of replacing the screen.
- Model: USGM-PMX2A0BK-Y-M-JP-0227
-
Published 3/13/2023
Verified 3/20/2023 -
Popularity: 3/5
Related Offers
Amazon · 4 mos ago
Anycubic Kobra Neo 3D Printer Auto Leveling, Pre-Installed 3D Printers with Direct Drive Extruder
$190 $290
free shipping
more
It's $100 under list price. Buy Now at Amazon
Features
- 90% Pre-installed Make It Easy: Anycubic Kobra Neo is a 90% Pre-installed 3D Printer, which make it possible to set up within 10 minutes. It can print perfectly right out of the box and this would make any beginner to be a great printer enthusiast, which is more suitable for beginners than other DIY 3D Printers.
- Direct Drive Extruder Make It Precise Control: The Direct Drive Extruder realizes smooth feeding and discharging of flaments and compatible with more flexible filament such as TPU/PLA/ABS/PETG. It is more lighter, features less inertia and more precise printing, can restore the form of the model to the greatest extent.
- PEI Spring Steel Platform Make It Easy Removal & Cost Saving: Compared with other FDM 3d printers, double-sided magnetic PEI spring steel platform is more durable and lasts longer, saving a lot of maintenance costs. You can remove the model easily.
- 25-Point Auto Leveling Make It Smart: Simple operation brings precise detection and fast leveling, helps you from the tedious manual leveling greatly.
- 34.4% Larger Creation Dimension Make It Large: Compared to the last generation Anycubic Mega S, the printing volume of Anycubic Kobra Neo has increased by 34.4% to reach 12.1 liters. The printing dimension is 250x 220x 220mm, equivalent to the size of a standard Size 5 soccer ball
- More Function: Make It Fast: Anycubic Kobra Neo 3d prints at a recommended typical speed of 50-60mm/s and reaches 100mm/s at its highest, which will save much time; Make It Smart: The standard power outage resuming sensor and the optional filament run-out sensor reduces filament waste and save time by avoiding the printing failure caused by the power outage and lack of filament.
- Customer Services: ANYCUBIC FDM 3d printers come with one-year warranty(The print head with 3 months, the heated bed with 6 months) and lifetime technical support. If you have any question on Anycubic Kobra Neo 3d printer, just click "Ask a question" through our page, we will fast respond within 24 hours.
- Model: 2KBN1011
Amazon · 5 mos ago
Anycubic Kobra 3D Printer Auto Leveling, FDM 3D Printers with Self-Developed ANYCUBIC LeviQ
$240 $360
free shipping
more
It's $120 under list price. Buy Now at Amazon
Features
- Modular Design & Easy Assembly: ANYCUBIC KOBRA is an all-in-one frame 3D printer, can minimize the shaking to improve the print quality. The modular design allows the printer to be assembled only in 10 minutes
- Intelligent Auto Leveling 3d printer: ANYCUBIC KOBRA captured with the Self-developed Anycubic LeviQ Leveling Function equipped with 25-point precise leveling up, which can compensate the unevenness of the heated bed automatically, to achieve easy, fast and precise leveling, providing you with a more intelligent printing experience.
- Ultra Smooth Printing: Direct drive extruder provides greater conveying force and preciser filament control. Compatible with PLA/ABS/PETG/TPU flexible materials. It can reduce jitter in filament transmission and ensure printing precision.
- Removable Magnetic Platform: The models can be removed by bending the spring magnetic platform gently after printing. The platform can withstand high-intensity printing and is corrosion free, saving you a lot of maintenance cost.
- Fast Printing & Large Printing Size: ANYCUBIC KOBRA 3D Printer maximum printing speed is 180mm/s, Average speed is 80mm/s, 167% faster than industry standard, enable you save more time on waiting. Large build volume of 8.7x8.7x9.84in / 220x220x250mm, which has enough space and freedom to realize your fantastic creativity.
- More Function: ANYCUBIC KOBRA is equipped with 4.3-inch LCD touch screen, which brings sensitive response and brighter display, offering better using experience; All ANYCUBIC 3D printers backed with lifetime technical support and 24 hours professional customer service.
- Model: Anycubic Kobra
Amazon · 8 mos ago
ANYCUBIC Photon M3 Resin 3D Printer, 7.6'' LCD SLA UV 3D Resin Printer with 4K+ Monochrome Screen,
$360
free shipping
more
Features
- [7.6" Screen & Large Print Volume] The ANYCUBIC Photon M3 resin printer features 7.6" screen and can print up to max volume of 7.08" x 6.45" x 4.03", giving you more possibilities for your creations. Adds a replaceable anti-scratch film (an extra protective film is included for replacement) to effectively prevent liquids from leaking to the LCD screen.
- [4K+ High Resolution & High Precision] Photon M3 4K+ monochrome resin printer help print clearer, finer surface textures. With a 400:1 screen contrast ratio, the fast printer perfectly prints models with sharp corners and delicate edges, and also greatly reduces residue in the resin tank.
- [Ultra-fast Printing] Photon M3 resin printer fastest printing speed can reach 50mm/h, and the single-layer exposure curing time is as low as 1.5s. It only takes 2.5 hours to print a 12cm model, which is 2.5 times faster than other 2k resin printers, help get models faster.
- [Power UV Light] Using the latest ANYCUBIBC Light Turbo light source system, the LED lamp beads arranged in a matrix provide a powerful ultraviolet light source. The new build plate has a texturized checkerboard pattern that dramatically improves adhesion and print success rate.
- [Adjustable UV Power] Compared with other LCD 3D printers, the ANYCUBIC Photon M3 printer can achieve 30%-100% power adjustment, not only supports ordinary 405nm UV resin, but also supports special resin, compatible with more materials, UV power can be adjust according to resin needs.
- Model: drpt-m3
Amazon · 1 yr ago
ANYCUBIC Photon Mono 4K, Resin 3D Printer with 6.23" Monochrome Screen, Upgraded UV LCD 3D Printer
$280 $380
free shipping
more
It's $100 under list price. Buy Now at Amazon
Features
- .", Photon Mono 4K Resin 3D Printer is upgraded to a 6.23" Monochrome LCD screen, 29% larger than ANYCUBIC Photon's 5.5" screen. Rapid prototyping greatly improves printing efficiency by printing single layer in 1.5S. The LCD screen is more durable, 4X longer lifespan than RGB screen.
- , ANYCUBIC Photon Mono 4K has a large printing size of 132mm x 80mm x 165mm /5.19" x 3.14" x 6.49", which leaves sufficient printing space and freedom for you to make any shapes of 3d models. The transparent top cover enables you to monitor the printing process while keeping 99.95% UV light blocking ratio, safe & easy for beginners.
- , The 4K Monochrome LCD Screen has a HD resolution of 3840 x 2400, 35um XY pixels and 7% light transmittance, which means you can print all your models in a higher precision level. In addition, the contrast ratio is more than 350, making printing details more accurate and delicate, thus improving the printing quality and success rate
- , ANYCUBIC Photon Mono 4K Resin 3D Printer's max printing speed can reach 50mm/h, it only takes 2.5 hrs to print a 12cm / 4.7in model, 2.5X faster than regular resin printers. This 3d printer is an ideal choice for you to obtain higher precision models quickly, saving more time on waiting
- , Photon Mono 4K is compatible with most 3d printing resin on the market, you can get the best printing effect with ANYCUBIC 3D Printing UV-Curing Resins. It has 30%-100% UV light power regulation, you can adjust the setting to meet your personalized needs.
- Model: Photon mono 4k
Amazon · 6 mos ago
Creality Official Ender 3 V2 3D Printer with MeanWell Power Supply Upgraded Version of Ender 3 Pro
$240 $290
free shipping
more
It's $50 under list price. Buy Now at Amazon
Features
- V4.2.2 UPDATED SILENT MOTHERBOARD: Creality Ender 3 V2 3D printer update the motherboard with silent TMC2208 stepper drivers: Compared to the Ender 3 and Ender 3 pro, a V2 design that delivers users out-of-the-box experience and silence-oriented upgrades,It has been built to offer a beefy level of power, featuring an ARM Cortex-M3 STM32F103 CPU and a TMC2208 stepper drivers
- NEW UI & 4.3 INCH COLOR SCREEN: The ender-3 v2 use new display equipped with UI LCD screen, user experience greatly upgrades with the newly designed operation UI system, convenient disassembly and simple operation.
- UL CERTIFIED MEANWELL POWER SUPPLY: Creality 3D printer equipped with well-known brand MeanWell power supply to heat up quickly and let users choose between power voltage of 115V or 230V, Meanwhile the ender 3 v2 has been shielded by its power supply from voltage spikes and power outages. If there is a electrical power failure or outage suddenly, printers can resume printing from the last layer, saving time and reducing waste.
- SMART ADD-ONS: Designed with the sleek(discretely hidden power supply); the nice blue extruder knob (easy filament feeding and filament changes); A tiny tool drawer (keep tools, spare nozzles and other handy items in); improved belt tensioners, Ender 3 V2 provides much more convenience to shape out your imagination.
- CARBORUNDUM GLASS PLATFORM: The carborundum glass platform enables the hotbed heat up quicker and prints adhere better. Ultra smoothness even on the first layer.With the latest Creality Ender 3 V2 3d printer, you no longer have to buy this upgrade because the printer comes with it as standard.
- 80% PRE-INSTALLED, EASY TO BE USED: Simple assembly with 80% pre-installed. Convenient and time saving.
- HUMANIZED DESIGN, SATISFIED EXPERIENCE: Humanized design with XY-axis tensioner for belts tightness adjustment and rotary knob for convenient filament feeding.
- TAKE OUT THE MODEL IN AN EASIER WAY: Carborundum glass platform with good thermal conductivity. Good adhesion and easy to take out the model.
- RESUMED PRINTING, SAVE TIME AND FILAMENT: Support resume printing and accurately record the printing data. No worry about sudden outage.
- INTEGRATED STRUCTURE DESIGN: Creality FDM 3D printer Ender-3 V2 for home use have all-metal integrated design with smooth motion. Quality and high precision printing.
- Model: Ender 3 V2
Amazon · 3 mos ago
ELEGOO Mercury XS Bundle Wash Cure Station with Handheld UV Light, Washing Machine UV Resin Curing
$199 $245
free shipping
more
It's $46 under list price. Buy Now at Amazon
Features
- ELEGOO AUTHORIZED DISTRIBUTOR - You will receive ELEGOO Mercury XS Bundle including washing station and curing station, 1 washing basket, 1 handheld UV light, 1 UV Protective Glass and professional technical support from ELEGOO OFFICIAL
- MORE EFFICIENT - 2 Machines, 1 power cord. Double connector power cord to meet washing and curing at the same time. Compatible with most LCD/DLP/SLA 3D printers including ELEGOO SATURN S
- MAXIMUM WASHING VOLUE - 255 x 201 x 124mm (Without building plates). The largest capacity washing machine at present. Larger / More print models can be washed at one time. You can put 2 Mars2 Pro building plates or 1 Saturn building plate at a time
- HIGHEST CURING EFFICIENCY - 3-sided Curing. With 28 UV lamp beads in the left and right, fresnel lens design, rotating turntable, 4 lamp beads at the bottom, your print models will be cured thoroughly
- EXTRA CURING TOOLS - Use the handheld UV lamp and the UV protective glass to get UV light into every nook and cranny of your awesome prints. Perfect for small elaborate prints
- Model: US-OP-3D-MYTXS
Amazon · 3 mos ago
ELEGOO Resin 3D Printer, Mars 3 MSLA 3D Printer with 6.6 inches Ultra 4K Monochrome LCD and
$209 $274
free shipping
more
It's $65 under list price. Buy Now at Amazon
Features
- Higher resolution and outputMars 3 is ELEGOO's first desktop mSLA 3D printer with super-high precision. It adopts a 6.66 inches mono LCD with Ultra 4K HD resolution, which has a 30% higher XY resolution at 35m and 37% higher build volume than Mars 2, delivering amazing 3D prints.
- The release film 2.0With less release tension, the small and thin supports added to your model will be well-protected. Mars 3 has a greatly improved success rate when printing 3D models with lots of details.
- Upgraded light source 36 highly integrated LED lights with a brand new COB lens that has a free-form surface can deliver over 90% uniformity of UV light illumination, making the printing accuracy upgraded to another level.
- Optimized heat sink unitELEGOO Mars 3 adopts copper tubes in the heat sink unit working with a high-quality cooling fan, which significantly improves the heat dissipation performance and brings down the light decay to less than 5% after 6000hours printing, extending the longevity of the UV LED lights.
- Chitubox Pro free trialMars 3 comes with a 1-year free trial of Chitubox Por slicer that worths 169USD. Chitubox Pro has loads of great upgrades from automatic supports to model repair tools, which helps both professional 3d printing labs and novices to maximize your output.Lychee Slicer is now also compatible with Mars 3.
- Model: US-EL-3D-M3
Amazon · 4 mos ago
ELEGOO Mars 2 Pro 3D Printer, 2K Mono MSLA UV Photocuring Resin LCD 3D Printer Front USB Input 2K
$181 $226
free shipping
more
It's $45 under list price. Buy Now at Amazon
Features
- Fast Printing and less maintenanceMars 2 Pro comes with a 6.08 inch monochrome LCD of 2K HD resolution and only takes 2 seconds per layer exposure to cure resin, which could significantly enhance your printing efficiency. Mono LCD has a much longer lifespan and stable performance during long term printing, thus saves your cost.
- Outstanding prints and ultra accuracyBrand new light source structure provides more even UV light emission and working together with 2K mono LCD, the printing details and precision are greatly improved and the 3D printed models are fascinating.
- Sturdy build qualityCNC machined aluminum body makes Mars 2 Pro a very formidable machine. Newly-designed sandblasted build plate has a much stronger adherence during printing and enables consistent printing success. Built-in active carbon could absorb the fume of resin and offer you a refreshing printing experience.
- Multi language interfaceMars 2 Pro now supports 12 kinds of languages so customers across the world could operate the 3D printer more conveniently without barriers. The newly added 10 languages are Japanese, Dutch, Korean, French, German, Russian, Italian, Spanish, Turkish and Portuguese.
- Warranty and ServiceWe provide a 1-year warranty on the whole printer and 6-month warranty for the 2K LCD (FEP film is excluded). Mars 2 Pro comes with 2 extra FEP films for you to replace the original one if needed.
- Model: MARS 2 Pro
Amazon · 1 day ago
Dell Latitude 7000 7400 14" FHD (1920x1080) Business Laptop (Intel Quad-Core i5-8365U, 16GB RAM,
$250 $2,000
more
It's $1,750 under list price. Buy Now at Amazon
Features
- Latitude 7400 Laptop 14" Non-Touch Screen
- Intel Core i7 8th Gen i7-8665U Dual-Core Processor 1.9GHz (4.8GHz With Turbo Boost)
- 256 GB SSD Hard Drive & 8GB RAM Memory
- 1920x1080 FHD resolution Non-Touch with an integrated Webcam and an integrated graphics chip
- Wireless Wifi & Bluetooth
- Model: Latitude 7400
- UPC: 703556746292
Amazon · 5 hrs ago
ASUS TUF Gaming F15 Gaming Laptop, 15.6 144Hz FHD IPS-Type Display, Intel Core i7-11800H Processor,
$1,098 $1,300
more
It's $202 under list price. Buy Now at Amazon
Features
- NVIDIA GeForce RTX 3050 Ti 4GB GDDR6 Graphics up to 1585MHz at 60W (75W with Dynamic Boost 2.0)
- 11th Gen Intel Core i7-11800H Processor (24M Cache, up to 4.6 GHz, 8 Cores)
- 15.6 144Hz Full HD (1920x1080) IPS-Type display
- 512GB PCIe NVMe M.2 SSD | 16GB DDR4 3200MHz RAM
- Durable MIL-STD-810H military standard construction
- Model: TUF506HE-DS74
- UPC: 195553162852
Amazon · 6 days ago
Arris Surfboard DOCSIS 3.0 Gigabit Cable Modem
$59 $100
free shipping
more
It's $41 under list price. Buy Now at Amazon
Features
- A Trusted Name in Home Connectivity: Better connectivity, better speed. The ARRIS SURFboard SB6190 DOCSIS 3.0 Cable Modem is designed to bring you better connectivity, increase your network capability and provide faster streaming and downloading throughout your home. From a trusted brand with over 260 million modems sold and growing.
- Save Money: Own your modem and save. Reduce your cable bill up to $168 dollars per year in cable modem rental fees (Savings vary by cable service provider). Certified for use with most U.S. cable internet service providers. For a complete list see additional details below.
- Modem Technology: DOCSIS 3.0 is a reliable, broadly available, and affordable technology that delivers high speed internet to your home devices.
- Simple and Secure Set-up: Plug-in the device, download the SURFboard Central App, and follow the instructions to activate the modem. Connect to a Wi-Fi router for networking.
- Compatibility: The SURFboard SB6190 is compatible with major U.S. cable internet providers including Cox, Spectrum, Xfinity and others. It's approved for cable internet speed plans up to 800 Mbps. Check your Internet Service Provider (ISP) website to confirm compatibility.
- What's in the Box: When you purchase you will get an ARRIS SURFboard SB6190 Cable Modem, Power Supply, Quick-Start guide, and 2-year warranty card.
- Ethernet Ports: Has one 1-Gigabit ethernet port to connect to a Wi-Fi router or other wired device.
- Dedicated Customer Support: Live Chat and Phone Support available 8am -1am EST.
- Warranty Provided by ARRIS: Product ships with 2-Year Limited Warranty.
- Model: SB6190
- UPC: 612572214077
Amazon · 7 mos ago
Germ Guardian Wi-Fi Bluetooth Smart Voice Control Air Purifier, UV Light Sanitizer Eliminates
$130 $166
free shipping
more
It's $36 under list price. Buy Now at Amazon
Features
- WIFI & BLUETOOTH ENABLED - Monitor and control your GermGuardian air purifier anywhere from the Guardian Technologies App that notifies you and sends important alerts
- VOICE CONTROL - Alexa and Google compatible for convenient setting changes
- 4-IN-1 AIR PURIFIER FOR HOME - True HEPA air filter reduces up to 99.97% of harmful germs, mold spores, and odor while utilizing a built-in air quality monitor (AQM) automatically adjusts speed to optimize room air quality
- KILLS GERMS - UV-C light helps kill airborne viruses such as influenza, staph, rhinovirus, and works with Titanium Dioxide to reduce volatile organic compounds
- TRAPS ALLERGENS - Pre-filter traps dust, pet hair, and other large particles while extending the life of the HEPA filter
- Model: CDAP5500BCA
- UPC: 817624011783
Amazon · 6 mos ago
ANYCUBIC 3D Printer Filament PLA 1.75mm, FDM Printer Filament 1kg Spool (2.2 lbs), Dimensional
$22
free shipping
more
Features
- :It has the advantages of no clogging, no bubbles, no tangles, no warpage, no drawing, easy to use, and the threads are neatly arranged, which effectively reduces the risk of knotting.
- : ANYCUBIC PLA filament is made of starch raw materials extracted from renewable plant resources (such as corn, cassava, etc.), which is a new type of environmentally material
- .: dimensional accuracy +/- 0.02mm to ensure even and smooth wire output. Anycubic filament has wide compatibility due to its small diameter error, and is suitable for almost all 1.75mm FDM 3D printers
- : When installing and replacing consumables, it is necessary to heat the print head (heated above 200C), otherwise the 3D printer will be easily damaged. Recommended printing temperature is 190-230 nozzle/extrusion temperature
- : completely dry for 24 hours before packaging, and vacuum seal with desiccant in a re-sealable nylon bag. Compared with ABS filament, PLA is less likely to deform (this makes printing easier)
- Model: FT-HPL
Amazon · 1 yr ago
ANYCUBIC Wash and Cure Station, Newest Upgraded 2 in 1 Wash and Cure 2.0 Machine for Mars Anycubic
$119 $200
free shipping
more
It's $81 under list price. Buy Now at Amazon
Features
- Newest Upgraded and More Convenient: Newest Wash and Cure machine added lens to UV lamp beads, the light source intensity distribution is more uniform, and the surface of the model is smoother. With the 360 automatic rotating curing table and added bottom reflector, the bottom curing has no dead ends, so that the entire model is cured more thoroughly
- 2-In-1 Wash and Cure Station: Dual functions of cleaning and curing can not only remove most of the chemicals, settle scrubbing and mess issues, but also seriously streamline the whole post-processing. It's a professional solution to the messy clean up job of your fabulous prints and also helps reduce the clutter on your desk. 1-60min time adjustable, customize knob cleaning and curing time. Each layer of the 3D printer model can be better cleaned and cured according to your DIY needs
- Widely Compatibility: The ANYCUBIC wash and cure machine is a great addition to most type of regular resin printer, Compatible with most LCD/DLP/SLA 3D printers such as QIDI Shadow, NOVA, Mars series and other regular resin printers with similar build volume size as it does for photon series, this Wash & Cure machine has opened up a whole new world of 3d printing for you and greatly enhance your workflow
- Effective and Diverse Washing Modes: There is a propeller in the bottom of wash cure station, when work, it spins the solution like a little tornado and changes spin direction halfway through the wash, which creates the perfect flow to clean every inch of the print. 2 modes of Cleaning: 1. Basket washing, Remove the model and put it into the basket for direct cleaning; 2. Suspension washing, Directly hang the print platform on the basket or cleaning stand to clean, reducing exposure to resin
- Anti-UV Light Hood: The transparent cover of this wash cure machine can block up to 99.95% of ultraviolet rays with a wavelength of 405nm, thus able to be effective in high resin solidification rate; and this wash and curing box adopts sealed cleaning, which effectively prevents the cleaning agent from splashing and volatilization, and provides more safety.
- Model: ANYCUBIC-WASH-CURE
Amazon · 7 mos ago
ANYCUBIC 3D Printer Filament PLA 1.75mm, FDM Printer Filament 1kg Spool (2.2 lbs), Dimensional
$22
free shipping
more
Features
- :It has the advantages of no clogging, no bubbles, no tangles, no warpage, no drawing, easy to use, and the threads are neatly arranged, which effectively reduces the risk of knotting.
- : ANYCUBIC PLA filament is made of starch raw materials extracted from renewable plant resources (such as corn, cassava, etc.), which is a new type of environmentally material
- .: dimensional accuracy +/- 0.02mm to ensure even and smooth wire output. Anycubic filament has wide compatibility due to its small diameter error, and is suitable for almost all 1.75mm FDM 3D printers
- : When installing and replacing consumables, it is necessary to heat the print head (heated above 200C), otherwise the 3D printer will be easily damaged. Recommended printing temperature is 190-230 nozzle/extrusion temperature
- : completely dry for 24 hours before packaging, and vacuum seal with desiccant in a re-sealable nylon bag. Compared with ABS filament, PLA is less likely to deform (this makes printing easier)
- Model: HPLWH-10
Amazon · 6 mos ago
ANYCUBIC PLA 3D Printer Filament, 3D Printing PLA Filament 1.75mm Dimensional Accuracy +/- 0.02mm,
$22
free shipping
more
Features
- & Anycubic 3D Printer PLA filament of 1.75mm diameter, Minimum dimensional tolerance 0.02mm, which making filament outflow smoother, came out homogeneous. The low shrinkage, stable printing dimensions make the fusion between the layers was very good to obtain an even better bridging result. You don't worry the diameter changes a lot then the feed rate is disrupted with thicker and thinner layers at all
- & The 3D Printing PLA filament was neat on the roll and leaves the spool easily without any crossed turns. Resulting in less thread pulling and twisting, no clogging, super under-extruding. It produces the cleanest, least stringing prints of any of the filaments you have used whilst resisting warping and also providing the glossiest finish. Without a single jam and adhesion issue which meeting your demands for printing freely
- - & - Designed and Manufactured with Clog-Free patent to guarantee a smooth and stable printing experience with our PLA refills. Completely dried for 24 hours before packaging and vacuum sealed with desiccants in nylon re-bag, enable much smoother and more stable printing. Larger spool inner diameter design makes feeding smoother
- - & Made from starch raw materials derived from renewable plant resources, PLA filament boasts lower melting temperature, even does not need a heated bed. No odor, no pollution and non-toxic during the printing. Anycubic PLA Filament Compatible perfectly with most FDM 3D Printers and 3D Pens that use 1.75MM filament on the market, such as Prusa, Makerbot, MK3, Ender 3, CR 10, Kobra, Mega, Chiron, Monoprice FlashForge and more
- 1. Install the spool on the spool holder of a 3D printer, and preheat the nozzle of the 3D printer. 2. Cut the filament tip diagonally, and guide it through the extruder and feeding tube. 3. Manually push the filament through the feeding tube to the nozzle, until the filament melt through the nozzle. Note: When installing and changing filament, we highly suggest to preheat the nozzle firstly to reduce the nozzle block risk
- Model: CAG-0901A
Alerts
Edit Alert-
Enable alerts for this product
Price Analysis
| Discount | Last Deal Price | Current Price | ||
|---|---|---|---|---|
| Amazon | -- | $500 | Buy Now |
Sign In or Register