
- :It has the advantages of no clogging, no bubbles, no tangles, no warpage, no drawing, easy to use, and the threads are neatly arranged, which effectively reduces the risk of knotting.
- : ANYCUBIC PLA filament is made of starch raw materials extracted from renewable plant resources (such as corn, cassava, etc.), which is a new type of environmentally material
- .: dimensional accuracy +/- 0.02mm to ensure even and smooth wire output. Anycubic filament has wide compatibility due to its small diameter error, and is suitable for almost all 1.75mm FDM 3D printers
- : When installing and replacing consumables, it is necessary to heat the print head (heated above 200C), otherwise the 3D printer will be easily damaged. Recommended printing temperature is 190-230 nozzle/extrusion temperature
- : completely dry for 24 hours before packaging, and vacuum seal with desiccant in a re-sealable nylon bag. Compared with ABS filament, PLA is less likely to deform (this makes printing easier)
- Model: HPLWH-10
-
Published 8/22/2022
Verified 5/6/2023 -
Popularity: 2/5

- :It has the advantages of no clogging, no bubbles, no tangles, no warpage, no drawing, easy to use, and the threads are neatly arranged, which effectively reduces the risk of knotting.
- : ANYCUBIC PLA filament is made of starch raw materials extracted from renewable plant resources (such as corn, cassava, etc.), which is a new type of environmentally material
- .: dimensional accuracy +/- 0.02mm to ensure even and smooth wire output. Anycubic filament has wide compatibility due to its small diameter error, and is suitable for almost all 1.75mm FDM 3D printers
- : When installing and replacing consumables, it is necessary to heat the print head (heated above 200C), otherwise the 3D printer will be easily damaged. Recommended printing temperature is 190-230 nozzle/extrusion temperature
- : completely dry for 24 hours before packaging, and vacuum seal with desiccant in a re-sealable nylon bag. Compared with ABS filament, PLA is less likely to deform (this makes printing easier)
- Model: FT-HPL

- & Anycubic 3D Printer PLA filament of 1.75mm diameter, Minimum dimensional tolerance 0.02mm, which making filament outflow smoother, came out homogeneous. The low shrinkage, stable printing dimensions make the fusion between the layers was very good to obtain an even better bridging result. You don't worry the diameter changes a lot then the feed rate is disrupted with thicker and thinner layers at all
- & The 3D Printing PLA filament was neat on the roll and leaves the spool easily without any crossed turns. Resulting in less thread pulling and twisting, no clogging, super under-extruding. It produces the cleanest, least stringing prints of any of the filaments you have used whilst resisting warping and also providing the glossiest finish. Without a single jam and adhesion issue which meeting your demands for printing freely
- - & - Designed and Manufactured with Clog-Free patent to guarantee a smooth and stable printing experience with our PLA refills. Completely dried for 24 hours before packaging and vacuum sealed with desiccants in nylon re-bag, enable much smoother and more stable printing. Larger spool inner diameter design makes feeding smoother
- - & Made from starch raw materials derived from renewable plant resources, PLA filament boasts lower melting temperature, even does not need a heated bed. No odor, no pollution and non-toxic during the printing. Anycubic PLA Filament Compatible perfectly with most FDM 3D Printers and 3D Pens that use 1.75MM filament on the market, such as Prusa, Makerbot, MK3, Ender 3, CR 10, Kobra, Mega, Chiron, Monoprice FlashForge and more
- 1. Install the spool on the spool holder of a 3D printer, and preheat the nozzle of the 3D printer. 2. Cut the filament tip diagonally, and guide it through the extruder and feeding tube. 3. Manually push the filament through the feeding tube to the nozzle, until the filament melt through the nozzle. Note: When installing and changing filament, we highly suggest to preheat the nozzle firstly to reduce the nozzle block risk
- Model: CAG-0901A

- & Matte texture with fewer visible layer lines provides with soft touch and elegance. Macaron color enhances the prints' quality with higher level of detail. The 3D printing matte PLA filament was neat on the roll and leaves the spool easily without any crossed turns. Resulting in less thread pulling and twisting, no clogging, super under-extruding
- & Anycubic 3D Printer PLA filament of 1.75mm diameter, Minimum dimensional tolerance 0.02mm, which making filament outflow smoother, came out homogeneous. With a 3 years storage capacity, It has excellent mechanical properties with strong toughness and low shrinkage which makes it easier to remove the support of the prints
- - & - Designed and Manufactured with Clog-Free patent to guarantee a smooth and stable printing experience with our PLA refills. Completely dried for 24 hours before packaging and vacuum sealed with desiccants in nylon re-bag, enable much smoother and more stable printing. Larger spool inner diameter design makes feeding smoother
- - & Made from starch raw materials derived from renewable plant resources, PLA filament boasts lower melting temperature, even does not need a heated bed. No odor, no pollution and non-toxic during the printing. Anycubic PLA Filament Compatible perfectly with most FDM 3D Printers and 3D Pens that use 1.75MM filament on the market, such as Prusa, Makerbot, MK3, Ender 3, CR 10, Kobra, Mega, Chiron, Monoprice FlashForge and more
- 1. Install the spool on the spool holder of a 3D printer, and preheat the nozzle of the 3D printer. 2. Cut the filament tip diagonally, and guide it through the extruder and feeding tube. 3. Manually push the filament through the feeding tube to the nozzle, until the filament melt through the nozzle. Note: When installing and changing filament, we highly suggest to preheat the nozzle firstly to reduce the nozzle block risk
- Model: HYGYL-10

- & Anycubic 3D Printer PLA filament of 1.75mm diameter, Minimum dimensional tolerance 0.02mm, which making filament outflow smoother, came out homogeneous. The low shrinkage, stable printing dimensions make the fusion between the layers was very good to obtain an even better bridging result. You don't worry the diameter changes a lot then the feed rate is disrupted with thicker and thinner layers at all
- & The 3D Printing PLA filament was neat on the roll and leaves the spool easily without any crossed turns. Resulting in less thread pulling and twisting, no clogging, super under-extruding. It produces the cleanest, least stringing prints of any of the filaments you have used whilst resisting warping and also providing the glossiest finish. Without a single jam and adhesion issue which meeting your demands for printing freely
- - & - Designed and Manufactured with Clog-Free patent to guarantee a smooth and stable printing experience with our PLA refills. Completely dried for 24 hours before packaging and vacuum sealed with desiccants in nylon re-bag, enable much smoother and more stable printing. Larger spool inner diameter design makes feeding smoother
- - & Made from starch raw materials derived from renewable plant resources, PLA filament boasts lower melting temperature, even does not need a heated bed. No odor, no pollution and non-toxic during the printing. Anycubic PLA Filament Compatible perfectly with most FDM 3D Printers and 3D Pens that use 1.75MM filament on the market, such as Prusa, Makerbot, MK3, Ender 3, CR 10, Kobra, Mega, Chiron, Monoprice FlashForge and more
- 1. Install the spool on the spool holder of a 3D printer, and preheat the nozzle of the 3D printer. 2. Cut the filament tip diagonally, and guide it through the extruder and feeding tube. 3. Manually push the filament through the feeding tube to the nozzle, until the filament melt through the nozzle. Note: When installing and changing filament, we highly suggest to preheat the nozzle firstly to reduce the nozzle block risk
- Model: HPLPU

It's $11 under list price. Buy Now at Amazon
- SUNLU PETG Filament 1.75mmSUNLU's random multicolor PETG filament is a unique surprise every time, providing an exciting opportunity to experiment with new colors and textures for your 3D prints.
- 8 Random Beautiful ColorsThis multicolor box bundle includes 8 rolls of 0.25kg each, totaling 2kg, with 8 random vibrant colors that offer endless possibilities for your 3D printing projects.
- Individually Vacuum PackedEach 0.25kg roll of SUNLU PETG filament is individually vacuum packed to ensure that the filament stays dry and dust-free, reducing the risk of nozzle clogging and print failure for a more successful printing experience.
- Super Neat Filament SpoolSUNLU's self-developed neat winding device ensures that the filament is easy to use, with a 100% neat rate that reduces the risk of tangles and jams, and provides a smoother and more efficient printing experience.
- PETG Filament AdvantagesPETG filament combines the best features of both PLA and ABS 3D printer filaments, offering the easy usability of PLA with the durable strength of ABS, making it suitable for a wide range of applications.
- PETG Recommend SettingsTo achieve the best printing results with SUNLU PETG filament, we recommend printing at a nozzle temperature of 220-250C, a bed temperature of 75-85C, and a printing speed of 50-100mm/s
- SUNLU Main 3D ProductsSUNLU offers a wide range of high-quality 3D printing products, including 3D printer filament, filament dryer, FDM 3D printer, 3D pen, 3D pen filament, 3D printer resin, LCD 3D printer, resin curing box, and other accessories, providing you with everything you need for a successful 3D printing experience.
- Model: PETG 3D Printer Filament Bundle
Verified: 05/31/2023 · Save $10.99 off list · Free Shipping

It's $20 under list price. Buy Now at Amazon
- Random Color, 0.25kg per Spool, 8 Rolls of 0.25kg 1.75mm PLA+ Filament0.25kg per Spool, 8 rolls of 250g SUNLU 1.75mm PLA+ filament. Shipped in random color. 250g Bundle will randomly select 8 rolls of 250g PLA PLUS filament from the following colors and deliver them to you. Black,White,Grey,Green,Blue,Red,Orange,GrassGreen,BlueGrey,BurlyWood,MintGreen,SunnyOrange,SkyBlue,CherryRed.
- Small Spool Diameter- Spool Diameter: 120mm(4.7inches), Spool Width: 43mm(1.69inches), Spool Hub Hole Diameter: 42mm(1.65inches). 250G spool size of the SUNLU filament mini spool is suitable for hanging on a lot of FDM 3D printers.
- SUNLU 100% Wound Neatly Filament- SUNLU R&D team has mastered advanced technology and produced 100% Neatly Wound PLA+ Filament, which is impossible for other brands. No knot, no winding, improve printing efficiency.
- 1.75mm Diameter- Dimensional Accuracy +/- 0.02mm. SUNLU filament has wide compatibility due to the small diameter error, it's suitable for almost all 1.75mm FDM 3D printers.
- Recommend Settings- We recommend printing at a Nozzle/Extrusion temperature of 210C - 235C (410F - 455F) and Bed/Platform temperature of 55C - 65C (131F - 149F).
- Model: SUNLU 3d printer filament pla plus
Save $20.00 off list · Free Shipping

It's $7 under list price. Buy Now at Amazon
- High-Quality PLA FilamentsMade of high-quality PLA, a commonly used thermoplastic material features lower melting temperature and ease of use, low warp and shrinkage, odorless during printing, and provides a glossy surface finish.
- Dimensional Accuracy & Consistency Strict tolerances guarantee these PLA filaments of 1.75 mm diameter much smoother and more stable printing with the dimensional accuracy of +/- 0.02 mm; 1 kg spool (2.2lbs).
- Less-tangle and Easy to UseFull mechanical winding and strict manual examination to ensure that the line is neatly arranged and less tangled, and to avoid possible snap and line breaking. A larger spool inner diameter design for easy feeding.
- Clog-Free & Bubble-FreeDesigned and manufactured with clog-free, superb layer bonding and great fluidity for smooth and stable extrusion. Complete dried for 24 hours before packaging and vacuum sealed with desiccants in the bag to protect the filament from moisture, no clogging and bubbling problems.
- Wide CompatibilityUniversal compatibility with most of the common 1.75mm FDM 3D printers on the market due to the high-quality standards in terms of manufacturing accuracy and a small dimensional tolerance of +/- 0.02mm.
- Model: US-EL-3D-P05N
Used 1 times · Verified: 05/22/2023 · Save $7.00 off list · Free Shipping

- Brand New PLA+ FilamentsMade of American Natureworks 4032D eco-friendly raw material, which features low warpage and shrinkage, excellent printability, high strength, good ductility, and odorless when printing
- Tough & High Impact StrengthWith enhanced toughness and better tensile strength, ELEGOO PLA+ has even higher impact strength and less brittleness & deformation than usual PLA. Meanwhile, the better cooling effect makes the overhang printing effect better and higher success rate of printing suspended models
- Glossy Surface & Good Layer AdhesionAccurate deposition and strong layer bonding bring a smoother surface finish without layer delamination issues. The lower printing temperature and stable thermoforming dimensions make it very easy to print with excellent print quality
- Less-tangle & Neatly WoundFull mechanical winding with secondary sub-winding and strict manual inspection ensures that the lines are neatly arranged on the reels, which effectively reduces the occurrence of crossed turns and tangles and avoids possible snap and line breakage. With an eco-friendly design in mind, our PLA+ adopts the cardboard spool, which degrades faster than plastic spools and is more eco-friendly. In addition, there are three holes for monitoring the remaining filaments and timely replacement
- Dimensional Accuracy & ConsistencyStrict tolerances and perfect dimensional accuracy ensure smooth and consistent feeding and optimal flow through the extruder for these 1.75mm PLA+ filaments with a dimensional accuracy of +/- 0.02mm
- No Clogging & No BubblesComplete dried before packing and vacuum sealed with desiccants in the bag to protect the filament from moisture and dust, no clogs and no bubbles. Perfectly compatible with most 1.75mm FDM 3D printers on the market
- Model: US-EL-3D-PP01
Verified: 05/31/2023 · Free Shipping

It's $63 under list price. Buy Now at Amazon
- Includes Power Supply: Connect up to 3 Hue Plays on 1 Power Supply unit; Requires the Hue Hub (sold separately, Model 458471); Search 'Philips Hue Hub' or 'B016H0QZ7I' to find this product on Amazon
- Voice Activated: The Philips Hue White & Color Ambiance Bar Light can be controlled using Your Voice when you have Amazon Alexa, Apple HomeKit, or Google Assistant Enabled (Philips Hue Hub and Smart Home Device required and sold separately); Philips Hue Smart lights can also be paired for Home automation with Your existing Nest products or Samsung SmartThings system
- Limitless Posibilities: Enhance Your Smart Home with the Philips Hue Play; The Design is aesthetically pleasing and will adapt well with any living room setup; Let you Smart light stand on Your cabinet to create a pleasant ambiance, mount it on the back of your TV or even lay it flat on the floor to brighten your walls From floor to ceiling
- Ultimate TV Lighting Experience: Create the most beautiful backlight for your television; Just mount Philips Hue Play behind your screen using the clips and double sided Tape Included in the Pack, and Enhance Your viewing Experience with Splashes of light surrounding Your television
- Easy Installation: Connect Not only 1, but up to 3 Hue Plays to the same Power Supply unit, leaving enough room for other devices; With each additional Hue Play, Your Smart Lighting Experience becomes even more immersive; This base kit Includes 1 Power Supply
- Expand Your Smart Home Experience: The Philips Hue Play requires the Hue Hub (sold separately) for the Full Smart Lighting Experience; Lifetime up to 25,000 hour(s); Input Voltage: 230 V AC, 120 V AC
- Model: 7820230U7
- UPC: 046677802516
Verified: 05/31/2023 · Save $62.67 off list · Free Shipping

It's $12 under list price. Buy Now at Amazon
- UPF 50+ Quick Dry Microfiber: Lightweight and durable for your most comfortable pair of swim trunks
- Side Seam Pockets for plenty of storage
- Comfortable mesh lining: Elastic waistband with drawstring for a flexible yet secure fit
- Triple Needle Side Seams and Rises make Kanu Surf swimming trunks and bathing suits among the highest quality you will own
- Available in Mens Sizes S-XXL and Boys Sizes 2T through 20 so Dad's and Kids can hit the beach as a team
- Model: 8465X-CHARCOAL-2X
- UPC: 687290119997
Used 1 times · Verified: 05/31/2023 · Save $12.37 off list · Free Shipping

It's $10 under list price. Buy Now at Amazon
- BASKETBALL SHORTS Comfy shorts made for the most active kids.
- FABRIC Made of 100% polyester mesh; Moisture wicking and quick drying technology keeps him comfortable as he moves!
- CLOSURE Pull-on elasticized waistband with functional drawstring
- DESIGN Features PLACE sport logo at hem and allover print
- THE CHILDREN'S PLACE We offer a huge selection of kid's clothing! Shop us for jeans, shorts, leggings, chinos, polo shirts, dresses, pajamas, and accessories.
- Model: 3039949
- UPC: 196733454019
Verified: 05/31/2023 · Save $9.96 off list · Free Shipping

It's $55 under list price. Buy Now at Amazon
- LIGHT AND PORTABLE: With its compact 8.7 screen, slim design and sturdy metal frame, Galaxy Tab A7 Lite tablet is perfectly sized for entertainment on the go; Easy for everyone to carry and travel with, especially kids. Technology: TFT
- LASTING PROTECTION: This device features an upgraded metal frame that helps protect against everyday hiccups; It's made to be durable, so your tablet keeps working even when handled by childrens accident-prone hands
- FASTER PERFORMANCE: Galaxy Tab A7 Lite has faster speed than previous models for smooth streaming with minimal interruptions; Also packs more expandable storage than before up to 1TB, almost 2x as much as the previous model
- LONG-LASTING BATTERY: Binge away with a long battery life and plenty of power to keep up with the content you love and then some with fast charging to help you juice up quickly on the go
- MULTI-DEVICE EXPERIENCE: Enjoy connectivity across all your Samsung Galaxy devices with One UI technology; Start watching a show on your smart phone, then send it to your tablet to finish later or vice versa
- SAMSUNG KIDS: Help your child discover a world of learning and fun with a safe, kid-friendly app that puts you in total control
- Model: SM-T220NZAAXAR
- UPC: 887276538297
Used 4 times · Verified: 05/31/2023 · Save $55.00 off list · Free Shipping

It's $120 under list price. Buy Now at Amazon
- 90% Pre-installed Make It Easy: Anycubic Kobra Neo is a 90% Pre-installed 3D Printer, which make it possible to set up within 10 minutes. It can print perfectly right out of the box and this would make any beginner to be a great printer enthusiast, which is more suitable for beginners than other DIY 3D Printers.
- Direct Drive Extruder Make It Precise Control: The Direct Drive Extruder realizes smooth feeding and discharging of flaments and compatible with more flexible filament such as TPU/PLA/ABS/PETG. It is more lighter, features less inertia and more precise printing, can restore the form of the model to the greatest extent.
- PEI Spring Steel Platform Make It Easy Removal & Cost Saving: Compared with other FDM 3d printers, double-sided magnetic PEI spring steel platform is more durable and lasts longer, saving a lot of maintenance costs. You can remove the model easily.
- 25-Point Auto Leveling Make It Smart: Simple operation brings precise detection and fast leveling, helps you from the tedious manual leveling greatly.
- 34.4% Larger Creation Dimension Make It Large: Compared to the last generation Anycubic Mega S, the printing volume of Anycubic Kobra Neo has increased by 34.4% to reach 12.1 liters. The printing dimension is 250x 220x 220mm, equivalent to the size of a standard Size 5 soccer ball
- More Function: Make It Fast: Anycubic Kobra Neo 3d prints at a recommended typical speed of 50-60mm/s and reaches 100mm/s at its highest, which will save much time; Make It Smart: The standard power outage resuming sensor and the optional filament run-out sensor reduces filament waste and save time by avoiding the printing failure caused by the power outage and lack of filament.
- Customer Services: ANYCUBIC FDM 3d printers come with one-year warranty(The print head with 3 months, the heated bed with 6 months) and lifetime technical support. If you have any question on Anycubic Kobra Neo 3d printer, just click "Ask a question" through our page, we will fast respond within 24 hours.
- Model: 2KBN1011
Used 1 times · Verified: 05/29/2023 · Save $120 off list · Free Shipping

It's $230 under list price. Buy Now at Amazon
- , ANYCUBIC Photon Mono X 2 is equipped with a 9.1'' 4K+ large mono LCD screen with a resolution of 4096 x 2560, and a single pixel is able to reach 48m, which is 4% higher than Photon Mono X, offering 3D printing enthusiasts a greater level of detail printing.
- , Photon Mono X2 resin 3d printer adopts Anycubic LighTurbo matrix light source, which can project the UV light both parallel and perpendicular to the LCD screen, providing a much more uniform light exposure, thus improving the quality of printed model.
- , The use of dual linear guides on the 3d machine Z-axis can effectively reduce the risk of layer shifting. Plus with POM clearance nut combined with a vibration absorption structure to ensure z-axis operation accuracy and eliminate layer lines, making the appearance of the model more smooth.
- , Anycubic Photon Mono X2 works well on Photon Workshop, CHITUBOX, Lychee etc, slicing software, and the wide compatibility respects your preferences (Please note: Anycubic Cloud service is not supported for Photon Mono X2)
- , The 3d printing platform of Photon Mono X2 has a textured checkerboard pattern that greatly improves adhesion and print success rate, easy to remove 3d models. Anti-scratch flim can protect the LCD screen from resin leakage damage, save the unexpected costs.
- Model: PMX2A0BK-11
Verified: 05/29/2023 · Save $230 off list · Free Shipping

It's $140 under list price. Buy Now at Amazon
- Modular Design & Easy Assembly: ANYCUBIC KOBRA is an all-in-one frame 3D printer, can minimize the shaking to improve the print quality. The modular design allows the printer to be assembled only in 10 minutes
- Intelligent Auto Leveling 3d printer: ANYCUBIC KOBRA captured with the Self-developed Anycubic LeviQ Leveling Function equipped with 25-point precise leveling up, which can compensate the unevenness of the heated bed automatically, to achieve easy, fast and precise leveling, providing you with a more intelligent printing experience.
- Ultra Smooth Printing: Direct drive extruder provides greater conveying force and preciser filament control. Compatible with PLA/ABS/PETG/TPU flexible materials. It can reduce jitter in filament transmission and ensure printing precision.
- Removable Magnetic Platform: The models can be removed by bending the spring magnetic platform gently after printing. The platform can withstand high-intensity printing and is corrosion free, saving you a lot of maintenance cost.
- Fast Printing & Large Printing Size: ANYCUBIC KOBRA 3D Printer maximum printing speed is 180mm/s, Average speed is 80mm/s, 167% faster than industry standard, enable you save more time on waiting. Large build volume of 8.7x8.7x9.84in / 220x220x250mm, which has enough space and freedom to realize your fantastic creativity.
- More Function: ANYCUBIC KOBRA is equipped with 4.3-inch LCD touch screen, which brings sensitive response and brighter display, offering better using experience; All ANYCUBIC 3D printers backed with lifetime technical support and 24 hours professional customer service.
- Model: Anycubic Kobra
Verified: 05/29/2023 · Save $140 off list · Free Shipping

It's $100 under list price. Buy Now at Amazon
- .", Photon Mono 4K Resin 3D Printer is upgraded to a 6.23" Monochrome LCD screen, 29% larger than ANYCUBIC Photon's 5.5" screen. Rapid prototyping greatly improves printing efficiency by printing single layer in 1.5S. The LCD screen is more durable, 4X longer lifespan than RGB screen.
- , ANYCUBIC Photon Mono 4K has a large printing size of 132mm x 80mm x 165mm /5.19" x 3.14" x 6.49", which leaves sufficient printing space and freedom for you to make any shapes of 3d models. The transparent top cover enables you to monitor the printing process while keeping 99.95% UV light blocking ratio, safe & easy for beginners.
- , The 4K Monochrome LCD Screen has a HD resolution of 3840 x 2400, 35um XY pixels and 7% light transmittance, which means you can print all your models in a higher precision level. In addition, the contrast ratio is more than 350, making printing details more accurate and delicate, thus improving the printing quality and success rate
- , ANYCUBIC Photon Mono 4K Resin 3D Printer's max printing speed can reach 50mm/h, it only takes 2.5 hrs to print a 12cm / 4.7in model, 2.5X faster than regular resin printers. This 3d printer is an ideal choice for you to obtain higher precision models quickly, saving more time on waiting
- , Photon Mono 4K is compatible with most 3d printing resin on the market, you can get the best printing effect with ANYCUBIC 3D Printing UV-Curing Resins. It has 30%-100% UV light power regulation, you can adjust the setting to meet your personalized needs.
- Model: Photon mono 4k
Alerts
Edit Alert-
Enable alerts for this product
Price Analysis
  | Discount | Last Deal Price | Current Price |   |
---|---|---|---|---|
Amazon | 4% | -- | $22 | Buy Now |
Sign In or Register