
- Neatly Wrapped PLA Filament: It has the advantages of no clogging, no bubbles, no tangles, no warpage, no drawing, easy to use, and the threads are neatly arranged, which effectively reduces the risk of knotting.
- Environmentally Friendly and degradable: ANYCUBIC PLA filament is made of starch raw materials extracted from renewable plant resources (such as corn, cassava, etc.), which is a new type of environmentally material.
- 1.75mm Diameter: dimensional accuracy +/- 0.02mm to ensure even and smooth wire output. Anycubic filament has wide compatibility due to its small diameter error, and is suitable for almost all 1.75mm FDM 3D printers.
- Special Attention: When installing and replacing consumables, it is necessary to heat the print head (heated above 200C), otherwise the 3D printer will be easily damaged. Recommended printing temperature is 190-230 nozzle/extrusion temperature.
- Vacuum Packaging: completely dry for 24 hours before packaging, and vacuum seal with desiccant in a re-sealable nylon bag. Compared with ABS filament, PLA is less likely to deform (this makes printing easier)
- Model: WCA-D04
-
Published 4/11/2022
Verified 6/6/2022 -
Popularity: 1/5

It's $3 under list price. Buy Now at Amazon
- Accuracy & Consistency, Anycubic 3D Printer PLA filament of 1.75mm diameter, Minimum dimensional tolerance 0.02mm, which making filament outflow smoother, came out homogeneous. The low shrinkage, stable printing dimensions make the fusion between the layers was very good to obtain an even better bridging result. You don't worry the diameter changes a lot then the feed rate is disrupted with thicker and thinner layers at all
- Neat Spool & Premium Quality, The 3D Printing PLA filament was neat on the roll and leaves the spool easily without any crossed turns. Resulting in less thread pulling and twisting, no clogging, super under-extruding. It produces the cleanest, least stringing prints of any of the filaments you have used whilst resisting warping and also providing the glossiest finish. Without a single jam and adhesion issue which meeting your demands for printing freely
- Clog-Free & Bubble-Free, Designed and Manufactured with Clog-Free patent to guarantee a smooth and stable printing experience with our PLA refills. Completely dried for 24 hours before packaging and vacuum sealed with desiccants in nylon re-bag, enable much smoother and more stable printing. Larger spool inner diameter design makes feeding smoother
- Eco-Friendly & Wide Compatibility, Made from starch raw materials derived from renewable plant resources, PLA filament boasts complete biodegradation and lower melting temperature, even does not need a heated bed. No odor, no pollution and non-toxic during the printing. Anycubic PLA Filament Compatible perfectly with most FDM 3D Printers and 3D Pens that use 1.75MM filament on the market, such as Prusa, Makerbot, MK3, Ender 3, CR 10, Mega, Chiron, Monoprice FlashForge and more
- Filament Installation, 1. Install the spool on the spool holder of a 3D printer, and preheat the nozzle of the 3D printer. 2. Cut the filament tip diagonally, and guide it through the extruder and feeding tube. 3. Manually push the filament through the feeding tube to the nozzle, until the filament melt through the nozzle. Note: When installing and changing filament, we highly suggest to preheat the nozzle firstly to reduce the nozzle block risk
- Model: FBA-D0166-New

It's $4 under list price. Buy Now at Amazon
- High Precision, 1.75mm filament diameter, dimensional tolerance 0.02mm, which making ANYCUBIC filament outflow smoother, low shrinkage, stable printing dimensions
- Super Performance, Tangle-free & no-plugging, consistent diameter and roundness, less stringing and warping, no clogging, strong layer adhesion
- Environment Friendly, 100% biodegradable, made from starch raw materials derived from renewable plant resources, no odor, no pollution and non-toxic
- Vacuum Packing, Vacuumed sealed, with a desiccant bag to keep it dry and keep out dust and foreign particles, prevent nozzle jams and yield smooth 3D models, Kindly Note, If the package is damaged, please contact us without hesitationHigh Compatibility, Compatible with most FDM 3D Printers and 3D Pens that use 1.75MM filament, such as, Prusa, Makerbot, Ender, Mega, Chiron etc
- High Compatibility, Compatible with most FDM 3D Printers and 3D Pens that use 1.75MM filament, such as, Prusa, Makerbot, Ender, Mega, Chiron etc
- Model: HPLGR

It's $3 under list price. Buy Now at Amazon
- High Precision, 1.75mm filament diameter, dimensional tolerance 0.02mm, which making ANYCUBIC filament outflow smoother, low shrinkage, stable printing dimensions
- Super Performance, Tangle-free & no-plugging, consistent diameter and roundness, less stringing and warping, no clogging, strong layer adhesion
- Environment Friendly, 100% biodegradable, made from starch raw materials derived from renewable plant resources, no odor, no pollution and non-toxic
- Vacuum Packing, Vacuumed sealed, with a desiccant bag to keep it dry and keep out dust and foreign particles, prevent nozzle jams and yield smooth 3D models, Kindly Note, If the package is damaged, please contact us without hesitationHigh Compatibility, Compatible with most FDM 3D Printers and 3D Pens that use 1.75MM filament, such as, Prusa, Makerbot, Ender, Mega, Chiron etc
- High Compatibility, Compatible with most FDM 3D Printers and 3D Pens that use 1.75MM filament, such as, Prusa, Makerbot, Ender, Mega, Chiron etc
- Model: HPLPU

It's $6 under list price. Buy Now at Amazon
- Accuracy & Consistency, Anycubic 3D Printer PLA filament of 1.75mm diameter, Minimum dimensional tolerance 0.02mm, which making filament outflow smoother, came out homogeneous. The low shrinkage, stable printing dimensions make the fusion between the layers was very good to obtain an even better bridging result. You don't worry the diameter changes a lot then the feed rate is disrupted with thicker and thinner layers at all
- Neat Spool & Premium Quality, The 3D Printing PLA filament was neat on the roll and leaves the spool easily without any crossed turns. Resulting in less thread pulling and twisting, no clogging, super under-extruding. It produces the cleanest, least stringing prints of any of the filaments you have used whilst resisting warping and also providing the glossiest finish. Without a single jam and adhesion issue which meeting your demands for printing freely
- Clog-Free & Bubble-Free, Designed and Manufactured with Clog-Free patent to guarantee a smooth and stable printing experience with our PLA refills. Completely dried for 24 hours before packaging and vacuum sealed with desiccants in nylon re-bag, enable much smoother and more stable printing. Larger spool inner diameter design makes feeding smoother
- Eco-Friendly & Wide Compatibility, Made from starch raw materials derived from renewable plant resources, PLA filament boasts complete biodegradation and lower melting temperature, even does not need a heated bed. No odor, no pollution and non-toxic during the printing. Anycubic PLA Filament Compatible perfectly with most FDM 3D Printers and 3D Pens that use 1.75MM filament on the market, such as Prusa, Makerbot, MK3, Ender 3, CR 10, Mega, Chiron, Monoprice FlashForge and more
- Filament Installation, 1. Install the spool on the spool holder of a 3D printer, and preheat the nozzle of the 3D printer. 2. Cut the filament tip diagonally, and guide it through the extruder and feeding tube. 3. Manually push the filament through the feeding tube to the nozzle, until the filament melt through the nozzle. Note: When installing and changing filament, we highly suggest to preheat the nozzle firstly to reduce the nozzle block risk
- Model: FBA-D0155-New

It's $3 under list price. Buy Now at Amazon
- PLA Plus+ is a good choice for a printing material if you are looking for high accuracy and high resolution.
- This 1.0kg spool features a thickness of 1.75mm 0.10mm, with a roundness variation of only 0.03mm.
- It has a nominal processing temperature range of 205 ~ 225C (401 ~ 437F).
- Thickness and roundness factors are laser measured at the factory to ensure accuracy over the entire length of the filament.
- The negatives of using PLA Plus+ is that it is vulnerable to degradation from moisture, sunlight, and heat.
- Model: 133878
- UPC: 889028090619
Used 1 times · Verified: 06/29/2022 · Save $2.77 off list · Free Shipping

It's $3 under list price. Buy Now at Amazon
- Dimensional accuracy: diameter variance of non more than 30 microns for consistent feeding and better 3D prints
- 3D Solutech PLA Filamet is compatible with nearly all 3D printers, including RepRap derivatives and those from MakerBot, Ultimaker, Bits from Bytes, Airwolf3D, Makergear, Printrbot and many others
- 3D Solutech engineered its professional 3D printer filament to strict tolerances and the highest quality standards, ensuring trouble-free operation with your 3D printer and superior results
- 3D Solutech pla filament is the choice of engineers, designers, and anyone else into 3D printing who demands the best
- Model: 3DSPRMPLASLV
- UPC: 691034977392

- PLA is a good choice for a printing material if you are looking for high accuracy and high resolution.
- It extrudes at lower temperatures, does not require a heated base, and has a very low shrinkage rate (0.3%).
- This 1 kg spool features a thickness of 1.75mm 0.10mm, with a roundness variation of only 0.03mm.
- It has a nominal processing temperature of 210 C (410F).
- Thickness and roundness factors are laser measured at the factory to ensure accuracy over the entire length of the filament.
- Model: 111551
- UPC: 757901815621

It's $4 under list price. Buy Now at Amazon
- ABS FILAMENT SPECS: 1 KG (approximately 2.20 lbs) Per Cardboard Spool 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.03mm)
- ABS FILAMENT PRINT SETTINGS: Recommended Extrusion/Nozzle Temperature: 240C - 260C (464F - 500F) Recommended Bed Temperature: 80C - 110C (176F - 230F) Spool Diameter: 8.81 in. (223.77 mm) - Spool Width: 2.81 in. (71.37 mm) - Spool Hub Hole Diameter: 2.00 in. (50.80 mm)
- INLAND ABS FILAMENT: Designed with the highest quality and compatibility in mind, Inland ABS Filament undergoes numerous testing procedures to ensure that you spend less time troubleshooting and more time printing! ABS is made from durable thermoplastic and is utilized for prints that are frequently handled, dropped, or in may be stored in high temperatures such as phone cases, sport camera mounts, toys, tools, electrical enclosures etc.
- EASY-TO-USE: The Inland ABS filament melts evenly and feeds smoothly into your 3D Printer creating defined corners, creating a durable, strong print. Produce your best print with our no-clog, bubble-free filaments. The Inland filament can be used with most 1.75MM FDM and FFF 3D Printers. To keep your filament tangle free do not let go of the filament on the spool! Always hold the spool and filament tightly, do not allow your filament to spring back.
- NEW CARDBOARD SPOOL: ABS filament is non-toxic and comes with a cardboard spool in a cardboard box. *Please Note* You may receive either the plastic spool or cardboard spool for a short duration. Your filament will arrive completely dried and vacuum sealed with desiccant to ensure a high-quality smooth print.
- Model: 308593
- UPC: 618996980529

It's $60 under list price. Buy Now at Amazon
- SPECS and CAPABILITIES - This ULTRA-QUIET Air Compressor and Tire Inflator, 1HP 6.3 Gallon Tank runs at a lower RPM (1700); This unit has a 1/4" inch NPT Quick Connect Coupler and a reliable Mechanical Pressure Gauge to monitor the PSI range. Time to Fill Tank 150 seconds; OUTPUT 3.0CFM @ 40PSI OUTPUT 2.2CFM @ 90PSI
- SUPER DESIGN - This unit uses a highly efficient maintenance-free Electric Brushless induction motor resulting in longer motor and pump life, capable of producing consistent performance at all times of operation with super fast Inflation; Our ULTRA-QUIET design produces a mere 60dB of sound during peak operation, making if comfortable to use without damaging your hearing.
- HANDY FEATURES - Equipped with a Safety Valve for easy and fast depressurizing, also including a Drain Valve for the releasing moisture build up in the tank to prevent corrosion (air hose not provided); Outfitted with commercial grade rubber suction cups that grip to both smooth and textured services and Ergonomic Grip Carry Handle for easy moving/portability
- BEST APPLICATION - (DO NOT use tools or the unit over the Max 120 PSI capability) Great for Job Site/Construction work use of pneumatic air tools like drills, saws, grinders and nail guns,also suitable for inflating high pressure tires on cars, SUVs, trucks, motorcycles and bicycle, sports balls and more (this unit DOES NOT SUPPORT heavy duty truck tires, like industrial tractors or semi-trucks), ideal for both indoor/outdoor use
- SAFETY and PROPER USE - Air tank of the compressor should be drained daily for safe and best optimal performance (DO NOT leave the battery plugged into the compressor when the unit is not in use) (DO NOT disconnect the air hose/tool until the you confirm the pressure gauge reads (0) psi (DO NOT use for deflation, ONLY for inflation)
- Model: GUT106-FBA-TR
Used 1 times · Verified: 06/27/2022 · Save $60 off list · Free Shipping

- [POWERFUL PERFORMANCE]: The HP Envy x360 2-in-1 laptop is powered with the latest Intel Core i7-1165G7(up to 4.6GHz Turbo Boost) and 32GB high-bandwidth DDR4 memory, powerful processing for advanced multitasking, demanding computing, smooth gaming, multiple tabs browsing, and everyday tasks. 1TB PCIe NVMe M.2 SSD (15x faster than HDD, stay cool and quiet) offers ample storage, quick boot-ups, fast data access, and improves the overall performance
- [PREMIUM DESIGN]: The slim and portable touchscreen laptop is 0.75 inch thin and 4.24 lb light, and you can work seamlessly, anywhere. Full-Size, Backlit, Nightfall Black Keyboard with Numeric Keypad. Imagepad with Multi-Touch Gesture Support. Offer 4 versatile modes (laptop, tablet, tent, stand) to best suit your viewing preferences and busy lifestyle, perfect for day-to-day computing, drawing or taking notes, and multimedia
- [STUNNING VISUALS]: 15.6 inch Full HD multitouch-enabled IPS touchscreen (1920 x 1080) Display boasts impressive color and clarity thats easy on your eye. The vivid, high definition micro-edge display ensures colors are vibrant and accurate. The 360-degree hinge adapts so you can capture every intricate sketch with precision.
- [EASY TO USE]: The HP 2-in-1 laptop is easy to use, Windows 10 Pro 64-bit offers premium performance and enterprise grade protection, and keeps going with long battery life. Powerful dual-band Wi-Fi 6 (3x faster than Wi-Fi 5) + Bluetooth 5.2 supports Gigabit speed and smooth video streaming, a 720p HD Webcam and stereo speakers ready for online class, remote work, and virtual meeting
- [BUILT FOR EFFICIENCY]: The windows laptop PC is sensibly optimized for productivity. 1 SuperSpeed USB Type-C 10Gbps signaling rate, 1 SuperSpeed USB Type-A 5Gbps signaling rate, 1 SuperSpeed USB Type-A 5Gbps signaling rate for fast file transfer, 1x HDMI, 1x headphone/microphone combo delivers true sound, Backlit Keyboard: comfortable, accurate typing, even in dim lighting. Free upgrade to Windows 11 when available.
- Hard disk size: 1.0 TB
- Ram memory installed size: 32.0 GB
- System ram type: ddr4_sdram
- Display size: 15.6 inches
- Model: HP Envy x360
- UPC: 195122428228
Verified: 06/28/2022 · Free Shipping

It's $20 under list price. Buy Now at Amazon
- Precision German engineering ensures excellent audio clarity, so you will hear every detail of your music.
- One button inline smart Remote makes it convenient to play and pause music and take calls without needing to fumble with your phone.
- Lightweight foldable design allows for easy storage making the headphone easy to carry anywhere.
- Secure over-ear fit provides excellent reduction of ambient noise, so you can relax and focus on the music.
- Model: HD 400S
- UPC: 615104327870
Verified: 06/27/2022 · Save $20 off list · Free Shipping

It's $240 under list price. Buy Now at Amazon
- Fast Assembly, Mega X 3D printer came in two modules and all it takes is to plug in 12 screws and 3 cables, easy to assemble and get printing right out of the box, Perfect choice for beginners and veteran
- High Print Precision, This 3D Printers print precision is greatly improved by equipping it with Y Axis Dual Sideway Design and Z-axis dual screw rod design, The pitting in the skin and texture in the clothing all can shows up
- Large Build Volume, This FDM printer comes with larger build spaces available, At 11.81in(L) x 11.81in(W) x 12in(H), able to print models that 90% of other 3d printers could not. More space for fulfilling your fantastic idea
- Patented Heat Bed, No hassle of sticker any more, Ultrabase bed surface coated with patented microporous coating, allowing the print holds strong when printing and then effortlessly falls off the bed when it cools to room temp at the end of the print, Kindly note, The bed will not go over 90 degree
- More Function, Resume Print: One click to resume from the last recorded position when suffered power outages, TFT Touch Screen: As responsive as operating on the phone, Meanwell Power Supply: Compliance with UL60950-1, enhance the safety performance, All ANYCUBIC 3D printers backed with lifetime technical support
- Model: mega x
Used 2 times · Verified: 06/27/2022 · Save $240 off list · Free Shipping

It's $100 under list price. Buy Now at Amazon
- Multi Function 3D Printer, Our 4th Gen 3D Printer integrates the functions of 3d printing and laser engraving to meet your more creative needs and unleash your creative potential, With modular design, you can assemble the printer in just a few minutes
- Multi Color Printing, Offer the option to print with different colourful filament on a single nozzle by pausing at a specific layer seamless connection which leads to providing you with more perfect matching options for model color, Pause up to 6 times
- Smart Auxiliary Leveling, ANYCUBIC Mega Pro 3D Printer equipped with intelligent leveling tools, automatically locate the leveling spot of the print platform and beep alert to precise print head height during leveling, more friendly use to beginners
- Upgraded Silent Drive, TMC2208 silent drive which is quieter than other 3D printers and can provide you with a more comfortable printing environment, Sturdy construction minimizes the shaking to greatly enhance the print quality
- More Function, Filament Detection, The sensor will pause printing and issue an alarm when the filament is insufficient, Resume Print, One click to resume from the last recorded position when suffering power outages, Safe Power Supply, Compliance with multiple certifications such as UL, CE, FCC, etc, enhances its safety, All ANYCUBIC 3D printers backed with lifetime technical support and 24 hours professional customer service
- Model: Mega Pro
Used 2 times · Verified: 06/27/2022 · Save $100 off list · Free Shipping

It's $100 under list price. Buy Now at Amazon
- WORKS OUT OF THE BOX: 3 steps to set up ANYCUBIC Mega S 3D printer with 8 screws and 3 cables for minutes, not only meets fast assembly needs for expert users but also friendly use to beginners. Printing volume reaches 8.27 x 8.27 x 8.07 inches.
- UPGRADED EXTRUDER DESIGN: Titan extruder provides precise extrusion for your 3D printing with solid filament drive and overall mechanical design compatible with most filaments, greatly reducing the clogging risk and improving printing accuracy. Works with 1.75mm 3D Printer Filament such as TPU, PLA, ABS, HIPS, WOOD, etc.
- RESUME PRINT & SENSOR DETECTION: Mega S 3D Printer can resume printing after power outage or any other unexpected stoppage.One click to resume from the last recorded position when suffering power outages. And the sensor pauses prints and sets off an alarm when you run out of filament which greatly saves time and cost, printing volume reaches 8.27 x 8.27 x 8.07 inches.
- ANYCUBIC ULTRABASE: Patented 3D printer printing platform surface coated with patented microporous coating, with excellent adhesion when printing and then effortlessly falls off the bed when it cools to room temp at the end of the print.
- MORE FUNCTION: ANYCUBIC MEGA S is an all-in-one frame 3D printer. The rigid metal frame can minimize the shaking to improve the print quality; The double-rod motor is more durable than the traditional clutch motor, does not lose steps, has high precision and more model details can be restored; TFT Touch Screen-As responsive as operating on the phone
- Model: Mega-S
- UPC: 605175686402
Verified: 06/27/2022 · Save $100 off list · Free Shipping

It's $10 under list price. Buy Now at Amazon
Verified: 06/25/2022 · Save $10.00 off list · Free Shipping
Alerts
Edit Alert-
Enable alerts for this product
Price Analysis
  | Discount | Last Deal Price | Current Price |   |
---|---|---|---|---|
Amazon |   | -- | $25 | Buy Now |
Sign In or Register