
Handy for older power supplies with a single 8-pin connector that need to feed a GPU requiring two 8-pin inputs, though keep in mind this setup draws both rails from one source, so it works best when your PSU has the wattage headroom to handle it. Buy Now at Newegg
- Dual 8-pin PCIe connectivity
- 18 AWG gauge wiring
- 30.5 cm extended length
- Sleeved braided cable design
- Model: Black Swan Mining 4/Pack

A straightforward solution if your power supply only has a 6-pin PCIe connector but your GPU requires an 8-pin connection, and getting two cables in the pack means you have a spare or can cover a dual-connector card. Buy Now at Newegg
- 6 Pin to Dual 8 Pin PCIe power adapter
- Powers high-performance graphics cards
- Y-splitter design for efficient cable management
- Durable 9-inch extension cable length
- 2-pack bundle for multiple GPU setups

Useful if you're adding a graphics card or powered PCIe device to a system that has spare SATA power connectors but no dedicated 6-pin PCIe power output from the PSU. Buy Now at Newegg
- Dual SATA 15-pin to 6-pin PCIe power cable
- Provides stable power for graphics cards
- 15cm length for efficient cable management
- Connects two SATA outputs to 6-pin GPU power
- Compatible with standard PCI-e video cards

Useful if your GPU power connector sits at an awkward angle relative to your case, since the 90-degree orientation can reduce cable strain and improve clearance in tight builds. Buy Now at Newegg
- Angled 8-pin connectors for improved cable management
- Supports standard ATX 8-pin female to male connections
- Optimizes airflow by reducing internal cable clutter
- Durable design for reliable video card power delivery
- Streamlines builds in compact computer cases

Designed for crypto mining rigs, this riser cable lets you mount GPUs away from the motherboard to improve airflow and fit more cards in a single build. Buy Now at Newegg
- PCIe x16 interface for GPU connectivity
- 6-pin power connector for stable performance
- USB 3.0 riser cable for flexible mounting
- Optimized for high-demand GPU mining tasks
- Model: 12X/010

Useful if your graphics card requires two 8-pin power connectors but your power supply only has one available PCIe cable to spare. Buy Now at Newegg
- Dual 8-pin PCIe power connectivity
- Supports high-performance graphics card power requirements
- Versatile 6+2 pin split connector design
- Durable PCIe 8-pin to dual cable construction

Useful if your power supply has open SATA connectors but your GPU requires a 6-pin PCIe power input, which is a common mismatch in budget builds or older systems being upgraded with a newer graphics card. Buy Now at Newegg
- Converts SATA power to 6-pin PCI-Express
- 8-inch length for flexible cable management
- Durable copper conductors for reliable power delivery
- Male-to-female connector configuration
- Model: Heretom

Useful if you're trying to connect a 2.5-inch laptop hard drive to a desktop motherboard or enclosure that only has a standard 44-pin IDE connection, bridging the size mismatch between the two connector types. Buy Now at Newegg
- 3.5 inch IDE to SD card adapter
- 44-pin male IDE interface

Useful if you're adding a graphics card to a system that doesn't have a dedicated PCIe power connector on the power supply, letting you draw power from SATA ports instead. Getting two cables in a pack gives you enough to run a card that needs dual connectors. Buy Now at Newegg
- Convert 15-pin SATA to 6-pin PCIe power
- 20cm length for flexible cable routing
- Reliably power graphics cards via SATA
- Dual pack for multi-component support
- Standardized connector compatibility

Handy for home lab or small office setups where rack space is limited, this bracket lets you mount a patch panel directly to the wall in a compact 1U footprint that folds flat when not in use. Buy Now at Newegg
- 1U vertical wall mount design
- Foldable patch panel bracket
- Fits 19-inch networking equipment
- Includes installation hardware

Small form-factor pluggable transceivers like this are typically used by network engineers and IT staff who need to add or replace fiber or copper uplinks in compatible switches and routers. This Aruba-branded module is designed to work within HPE/Aruba networking environments, so it's the straightforward pick if you're already running that ecosystem. Buy Now at Newegg
- Model: J9054DCM

Single-mode fiber transceivers at this spec level are typically purchased by network engineers expanding or upgrading data center or enterprise switch infrastructure, and the 10km range makes this suited for longer runs between buildings or floors. This is a purpose-built component, so you'd only be shopping for it if you already know you need 25G SFP28 LR compatibility in your Aruba environment. Buy Now at Newegg
- 25Gbps data transfer rate
- 10km reach via single-mode fiber
- SFP28 form factor for high-density networking
- LC duplex connector interface
- Model: JL486A

Newegg has this 3-meter direct attach copper breakout cable for Juniper QFX series switches, which is the straightforward, low-latency option for short-distance connections between top-of-rack switches and servers without the cost of active optics. Buy Now at Newegg
- Model: QFX-QSFP-DACBO-3M

Handy for builds where you're running out of SATA power connectors and need to split a single cable into two outputs for additional drives or accessories. Buy Now at Newegg
- Splits power output into two 15-pin SATA connections
- Includes secure locking buckle for stable power connection
- Supports 90-degree angle for space-saving cable management
- Provides 0.2M reach for flexible internal component power

Handy for repurposing 4-pin PC case fans as standalone USB-powered fans, which comes up when you need quiet, low-cost airflow outside of a computer build. Buy Now at Newegg
- Powers 4-pin fans from 5V USB ports
- Connects standard cooling fans to USB power sources
- Compact 4-pin female to 5V USB male adapter
- Enables external fan operation without motherboard headers
- Includes three adapter cables per pack

A simple, low-cost fix if your PC fans are running louder than you'd like — these cables reduce fan speed passively without any software or controller needed, and having 10 in a pack means you can quiet down an entire build at once. Buy Now at Newegg
- Reduces PC CPU fan speed and noise
- 4-pin male to 4-pin female connector
- 11cm cable length
- 10-piece value pack

Handy for quieting down a loud case fan without buying a fan controller — you just plug it inline and it drops the fan speed passively with no software or extra hardware needed. Buy Now at Newegg
- Reduces PC CPU fan speed
- Decreases fan noise levels
- Compatible with 3 and 4 pin connectors
- 11cm cable length for flexible placement
- Simple male to female connector design

Handy for PC builders who need to run multiple case fans from a single motherboard header, since most boards only have two or three fan headers total. Buy Now at Newegg
- Expand one motherboard header to four PWM fans
- Support PWM speed control for all connected fans
- Durable black sleeved cable design
- Standard 4pin connectors for wide compatibility
- Extended 30cm length for flexible cable management

Handy for PC builders who need to extend or split a single ARGB header to reach fans or lighting strips that are too far from the motherboard connection. Buy Now at Newegg
- 5V 3pin ARGB sync compatibility
- Motherboard RGB synchronization
- Extension cable for flexible hardware placement
- Compatible with ASUS, GIGABYTE, and MSI motherboards
- 0.5m length for easy cable routing

Handy for PC builders who need to run multiple case fans from a single motherboard header, this cable lets you split one 4-pin PWM connection into four without losing speed control. Buy Now at Newegg
- 12V 3-pin PWM power extension
- 4-way port splitter
- Motherboard cooling fan support
- 22AWG durable wire