
Useful if your power supply has a 6-pin connector but your GPU requires two 8-pin connections, which is a common mismatch when upgrading to a newer graphics card without replacing the PSU. Buy Now at Newegg
- 6-pin to dual 8-pin PCIe power adapter
- Powers high-performance graphics cards
- Enables dual GPU connectivity
- Extends power supply reach
- Compatible with PCI Express video cards

Useful if you have a newer PSU with a PCIe 5.0 16-pin (12+4) connector but a GPU that still takes dual 8-pin power inputs, letting you use modern hardware without replacing your graphics card or power supply. Buy Now at Newegg
- Supports PCIe 5.0 16-pin interface
- Connects two 8-pin to 12+4 pin power
- Enables high-performance GPU power delivery
- Straight and elbow connector options available

Handy for GPU upgrades where your power supply only has one 8-pin PCIe connector but your graphics card requires two, saving you from buying a new PSU just to meet the power connector requirement. Buy Now at Newegg
- 8-pin to dual 8-pin GPU power cable
- Provides two additional PCI-Express power connectors
- Compatible with standard graphics card power requirements
- 20cm length for flexible cable management
- Enables power supply expansion for high-performance GPUs

Designed for enterprise and data center networking, this 40GbE QSFP+ transceiver handles intermediate-reach connections up to 1.4km over single-mode fiber, which suits IT teams looking to extend links between buildings or across a campus without pulling new cabling. Buy Now at Newegg
- 40Gbps data transfer rate
- QSFP+ form factor
- 1310nm wavelength
- 1.4km reach
- Model: JNP-QSFP-40GE-IR4

A longer power cord is useful when your monitor is positioned far from an outlet or when your current cable is too short to route cleanly behind furniture. Buy Now at Newegg
- Global 100-240VAC voltage compatibility
- Extended 10-foot power cord
- Integrated over-current and short-circuit protection
- FCC, CE, and RoHS safety certified
- High-quality, fully compatible replacement charger

A direct-attach copper cable for connecting 10GbE switches, routers, or servers at short distances, typically within the same rack or adjacent racks in a data center. Cheaper and lower-latency than optical transceivers, this is a straightforward buy if you're building or expanding a 10G network and need reliable short-run connectivity. Buy Now at Newegg
- 10GbE SFP+ Direct Attach Copper cable
- Support for 10Gbps data transfer
- Hot-swappable connectivity
- Low latency signal transmission
- Model: J9281D

Useful if you're building or upgrading a PC and need an extra 8-pin power connector to reach your graphics card without stressing the original cable routing. Buy Now at Newegg
- 8-pin male connector for high-power GPU support
- 18AWG wire gauge for reliable power delivery
- Compatible with R720 R730 server hardware
- Supports K80 M60 M40 P40 P100 GPUs
- PCI-E power extension for graphics cards

Handy for tight server rack or AV cabinet installations where a straight cord would strain the connector or block adjacent ports, the 90-degree plug keeps cables routed flat against the equipment. Buy Now at Newegg
- 90-degree angled C14 connector for tight spaces
- Extends reach between devices and PDUs or UPS
- Flush mounting design improves cable organization
- Supports up to 10A 250V power delivery
- Universal compatibility for 3-pin power devices

Designed for short-range, high-speed connections between network switches and servers, this 10-meter direct attach copper cable is a cost-effective alternative to fiber optic transceivers when your equipment supports SFP ports and your runs stay within 10 meters. Buy Now at Newegg
- 10m length
- Direct Attach Copper cable
- SFP+ connectivity
- Low latency high-speed data transmission
- Model: QFX-SFP-DAC-10MA

A short 90-degree C13-to-C14 cable is useful when you're working in a tight rack or cabinet where a standard straight cord would put strain on the connector or block airflow — the angled end lets you route cables closer to the wall or panel. Buy Now at Newegg
- 90-degree angled connector for tight spaces
- Extends power connection to PDUs or UPS
- Eliminates excess cable clutter
- 18AWG wire supports 10A 250V power
- Compatible with most 3-pin power devices

Handy for older motherboards with an open 9-pin USB header, this cable lets you add two USB 2.0 ports to the back of your case without buying a new hub or PCIe expansion card. Buy Now at Newegg
- 9-pin motherboard header to 2 USB 2.0 ports
- Converts internal header to external USB connectivity
- Connects two USB devices to motherboard directly
- Simplifies internal cable management
- Provides two additional USB 2.0 interface ports

Useful for GPU riser builds or vertical GPU mounting setups where your graphics card needs to connect to a PCIe slot that isn't directly accessible on the motherboard, and the 4.0 spec means you won't bottleneck a modern card the way older 3.0 risers can. Buy Now at Newegg
- PCI-E 4.0 support for high-speed data transfer
- X8 to X16 interface compatibility
- 30cm flexible cable length for custom builds
- Optimized signal integrity for gaming GPUs
- Model: K83SF-SI

Handy to keep around if you've lost or damaged the DC power cable on a compatible HP or Dell laptop, since replacing just the cable is cheaper than sourcing a whole new adapter. Buy Now at Newegg
- 1.2M power cable for HP and Dell laptops
- 7.4 x 5.0 mm DC jack connector
- Durable power supply cable adapter

Handy for anyone repurposing old PC fans for a USB-powered setup, like cooling a workbench or electronics project outside of a traditional case. Buy Now at Newegg
- USB-C to 3-pin 4-pin fan power adapter
- Powers computer case fans via USB-C
- 20cm cable length for flexible placement
- Adapter cord for custom cooling solutions

Useful if your Dell Precision T3630, T3640, or T3650 tower's power switch cable is damaged or missing and you need an OEM-style replacement rather than a workaround. Buy Now at Newegg
- Replacement computer case power switch cable
- Compatible with T3630, T3640, T3650 models
- Original part number PHPW7, 0PHPW7
- Restores power button functionality
- Direct fit for specified workstation chassis

Useful if your motherboard has limited fan headers but you need to run multiple case fans from a single connection, keeping them all synced to the same PWM speed signal. Buy Now at Newegg
- PWM fan hub connects five fans to one header
- Supports both 4-pin PWM and 3-pin fan connections
- Integrated LED RGB lighting with manual toggle switch
- 30cm sleeved cable for organized cable management
- Provides motherboard-controlled cooling for multiple fans

A short direct-attach copper cable designed for connecting 50G network equipment within a rack, useful if you're building or upgrading a high-density data center environment where minimizing cable runs between switches and servers matters. Buy Now at Newegg
- 50G data transfer rate
- QSFP56 to SFP56 connector compatibility
- 0.65m cable length
- Brand: HP
- Model: S1J07A

Handy for PC builders who need extra reach when routing case fans to a motherboard header that's too far away for the stock cable. Buy Now at Newegg
- 82cm PWM extension cable for flexible placement
- Connects 4-pin motherboard headers to CPU fans
- Powers case fans with 4-pin compatibility
- Extends fan cable reach within computer chassis
- Maintains PWM speed control signal

Handy to have around if you're building or upgrading a PC and need to improve wireless signal strength, particularly when your motherboard's included antennas are underperforming or missing entirely. Buy Now at Newegg
- 2x internal Wi-Fi antennas for stable connectivity

A straightforward accessory for anyone who needs to pull data off an old 2.5" or 3.5" SATA drive without buying a full enclosure — handy for recovering files from a retired laptop or desktop hard drive. Buy Now at Newegg
- 5Gbps data transfer speeds
- Supports 2.5 and 3.5-inch drives
- Compatible with SATA I/II/III
- Supports up to 20TB capacity
- Includes external power adapter