
A simple solution for PC builders who need to run multiple case fans from a single motherboard header, which helps when your board has limited fan connectors but your build requires more airflow points. Buy Now at Newegg
- Powers 5 PWM fans from one motherboard header
- Molex power input ensures stable current
- Braided cable design for increased durability
- 4-pin TX4 connector supports PWM speed control
- Compact design for clean cable management

Handy for anyone building or upgrading a PC who wants to add some interior lighting without committing to a full RGB ecosystem — these are a straightforward, low-cost way to illuminate your case. Buy Now at Newegg
- Magnetic back for easy installation
- 30cm length with 18 LEDs
- Two-pack lighting kit
- Molex connector power
- S Series Blue LED lighting

A compact 60mm case fan that suits older or smaller-form-factor PC builds where airflow is limited and a direct replacement is needed without modifications. Buy Now at Newegg
- 60x60x20mm compact cooling fan
- DC12V 2-pin power connection
- Sleeve bearing design
- Versatile compatibility for cases and power supplies
- Model: ACP6020

Sized for enthusiast builds with large motherboards and extensive cooling setups, this full-tower case gives you the room to work with EATX form factors, multiple radiators, and high-end components without compromising on airflow or cable management. Buy Now at Newegg
- Supports dual 420mm radiators
- Built-in graphics card holder
- Tool-free side panels
- Dual front panel USB 3.2 Gen 2x2 Type-C
- E-ATX full-tower support

A straightforward solution for PC builders running multiple case fans who want to consolidate wiring and control fan speeds from a single header rather than hunting for open slots on the motherboard. Buy Now at Newegg
- Powers up to 10 PWM fans simultaneously
- Compatible with 3-pin and 4-pin fans
- Molex IDE power connector for stable performance
- Includes 1ft motherboard PWM control cable
- Compact fan hub for organized cable management

Handy for PC builders running multiple case fans who want to power them all from a single connection rather than routing cables to individual motherboard headers. Buy Now at Newegg
- Connect up to 8 fans to one motherboard header
- Power via reliable Molex or SATA 15Pin interface
- Compatible with standard 4Pin PWM desktop fans
- Compact design for easy PC case installation
- Model: Fan Hub 12V 8Port

A solid pick for builders who want tool-free drive installation and good airflow in a mid-tower form factor, without paying a premium for a name-brand chassis. Buy Now at Newegg
- Micro ATX form factor compatibility
- Compact mini tower chassis design
- External 5.25 and 3.5 inch drive bays
- 2x USB 2.0, 2x USB 3.0, 2x Audio front ports
- Model: EFS712.CQ450TB3

A mid-tower case with four ARGB fans included is a reasonable starting point for a budget build where you'd otherwise spend extra on cooling, and at $85 it's about $5 below the list price. Buy Now at Newegg
- Back plug motherboard design
- Pre-installed 4x 120mm ARGB fans
- Tempered glass side panel
- Dual USB 3.0 and Type C ports
- Model: 4503

A solid pick for first-time PC builders or anyone who wants a clean, straightforward mid-tower without paying for features they'll never use — the Focus G keeps cable management simple and airflow reasonable at a budget-friendly price point. Buy Now at Newegg
- Supports ATX, Micro ATX, Mini ITX motherboards
- Features USB 3.0 and USB 2.0 front ports
- Durable steel and plastic construction
- Bottom-mounted power supply design
- Model: Focus G

Sized for standard 120mm case mounts but running at 3,500RPM, this fan moves more air than most stock case fans, which makes it worth considering if you're dealing with thermal issues in a mid or full-tower build. Buy Now at Newegg
- 3500RPM high-speed cooling performance
- 147.93CFM massive airflow capacity
- Durable dual ball bearing design
- 4-pin PWM power connector
- 120x38mm standard case fan size

Compact by design, the V100 suits anyone building a smaller form-factor PC who wants a case that fits micro-ATX or mini-ITX motherboards without taking up a full tower's worth of desk space. Buy Now at Newegg
- Supports Micro ATX and ITX motherboards
- Fits VGA cards up to 280mm
- Supports CPU coolers up to 120mm
- Dual HDD and dual SSD storage capacity
- Model: V100

The Lancool 217 is a mid-tower ATX case with real walnut wood paneling, which makes it a reasonable pick if you want your build to look less like standard PC hardware and more like something you'd actually want on a desk. Buy Now at Newegg
- Genuine walnut wood front panel design
- Five high-performance pre-installed PWM fans
- Dual tempered glass side panels for visibility
- Flexible power supply and cable management system
- Model: LAN217W

Compact Mini-ITX cases that don't sacrifice expansion options are harder to find than you'd think, and the SG13 fits a full-size GPU while keeping a small footprint, which makes it a reasonable pick for a budget or space-constrained build. Buy Now at Newegg
- Supports standard ATX12V/EPS12V power supplies
- Compatible with Mini DTX and Mini ITX motherboards
- Mesh front panel for optimized airflow
- Compact Mini-ITX form factor
- Dual front-facing USB 3.0 ports

A straightforward solution for PC builders who want to run multiple case fans from a single motherboard header without losing PWM speed control. Buy Now at Newegg
- 4-pin PWM 5-way fan splitter
- Sleeved cable design for durability
- 40cm extended cable length
- Integrated LED RGB light switch

A straightforward option for PC builders or anyone cooling a server rack who needs more airflow than a standard case fan provides, without paying much for it. Buy Now at Newegg
- 120mm x 25mm 12V DC brushless cooling fan
- Dual ball bearing design for high durability
- High-speed airflow for computer case cooling
- Standard 2-pin connector for easy installation

Solid pick for PC builders who prioritize quiet operation and cable management, as the Define 7 is built around sound dampening and a clean interior layout with plenty of room for custom configurations. Buy Now at Newegg
- Supports E-ATX, ATX, Micro ATX, Mini ITX motherboards
- Features USB 3.2 Gen 2x2 Type-C front port
- Includes two USB 3.0 and two USB 2.0 ports
- Constructed with brushed aluminum and steel
- Model: Define 7

Compact and budget-friendly, this Micro ATX case suits builders who want a no-frills enclosure for a smaller form factor desktop without spending much on the chassis itself. Buy Now at Newegg
- Supports Micro ATX and Mini ITX motherboards
- Tempered glass side panel
- 1x USB 3.0, 2x USB 2.0, 2x Audio front ports
- Bottom-mounted power supply design
- Model: CA-1J4-00S1WN-01

A solid pick for micro-ATX builds where you want a balance of compact size and decent airflow, since the A3-mATX supports up to 360mm radiators and has a mesh front panel that actually lets air through. Buy Now at Newegg
- Micro ATX and ITX motherboard compatibility
- USB 3.1 Type-C front port
- 2 x USB 3.0 Type-A front ports
- Durable steel chassis construction
- Model: A3-mATX-X

Handy to have around if you're building or modifying a PC and want to stop scrounging for the right screw size — this 100-piece kit covers the standard fasteners used for case fans so you're not held up by missing hardware. Buy Now at Newegg
- 100 piece computer fan screw kit
- 50 pieces #6-32x30mm screws included
- 50 pieces M5x10mm screws included
- Durable black finish for PC chassis
- Universal radiator and fan mounting components

Sized for E-ATX motherboards, this case is worth a look if you're building a larger system and want extra room for cable management, cooling hardware, or a more complex component layout. Buy Now at Newegg
- Supports E-ATX, ATX, Micro ATX motherboards
- Holds up to 10 3.5-inch HDDs and 3 2.5-inch SSDs
- Includes 7 pre-installed 120mm cooling fans
- Fits GPUs up to 400mm and coolers up to 180mm
- Features integrated dust filters and USB 3.0 connectivity