
The Meshify C is a solid pick for builders who prioritize airflow, with its angular mesh front panel moving significantly more air than a solid or tempered glass front at the same price point. Buy Now at Newegg
- High-airflow mesh front panel design
- Supports ATX, Micro ATX, Mini ITX motherboards
- Compact mid-tower form factor
- 2x USB 3.0 front ports
- Model: Meshify C

A necessary repair part if your Dell Precision 5470, 5480, or 5680 laptop has a failing or damaged GPU connection, since the flex cable is what carries the signal between the GPU and the display. Buy Now at Newegg
- Compatible with Precision 5470, 5480, 5680
- VGA video card connection
- IO board flex connector
- 0HJC2C part number
- Model: 0HJC2C

A direct replacement option for anyone dealing with a failing GPU fan, particularly if your card uses an 85mm 4-wire PWM setup and you'd rather swap the fan than replace the whole cooler. Buy Now at Newegg
- 12V 4-wire temperature control
- 85mm fan diameter
- Fluid circulative bearing
- 4-pin power connector
- Model: FS1290-AP084C

Replacing a failing or loud GPU fan yourself is usually cheaper than buying a new card, and having two on hand means you can swap both at once if your cooler runs dual fans. Buy Now at Newegg
- Compatible with GeForce RTX 3060, 3070, 3080, 3090 Ti
- Direct replacement for high-performance graphics card fans
- Dual fan configuration ensures optimal cooling efficiency
- Designed for specific VGA video card hardware compatibility

A solid pick if you're building a compact system and want a case that balances airflow with a clean exterior, without the extra bulk of a full-tower chassis. Buy Now at Newegg
- Micro ATX motherboard compatibility
- 2x USB 2.0, 2x USB 3.0, 2x audio ports
- Compact ATX mini tower design
- Two external 5.25 inch drive bays
- Model: EFS052.CH450TB3

The Lancool 217 is a mid-tower ATX case with real walnut wood paneling, which makes it a reasonable pick if you want your build to look less like standard PC hardware and more like something you'd actually want on a desk. Buy Now at Newegg
- Genuine walnut wood front panel design
- Five high-performance pre-installed PWM fans
- Dual tempered glass side panels for visibility
- Flexible power supply and cable management system
- Model: LAN217W

Handy for PC builders who want to reduce dust buildup inside their case without screwing anything in — the magnetic attachment means you can pull it off for cleaning in seconds. Buy Now at Newegg
- Magnetic attachment system
- Protective dust filtration mesh
- Compatible with cooling fans
- Easy cleaning and maintenance
- Model: 12 X 36CM-AB01

A solid pick if you want a mid-tower case with some visual personality, as the Loong Edition styling sets it apart from the typical black box while still fitting standard ATX builds. Buy Now at Newegg
- Dual tempered glass panels with detachable design
- Supports E-ATX, ATX, Micro ATX, ITX motherboards
- Includes 6 pre-installed PWM cooling fans
- Front panel USB 3.0, USB 2.0, HD audio ports
- Model: Endura Pro

Useful if you're building or maintaining a PC and want to cut down on dust accumulation inside the case without spending much per filter — at 10 in a pack, you have enough to cover multiple intake fans with extras left over. Buy Now at Newegg
- 80mm x 80mm universal fit
- Durable PVC mesh material
- Effective PC cooling fan dust protection
- Includes ten filter units per pack
- Model: PVCFL8CM10PK

Comes bundled with a 400W power supply, which saves you the separate purchase if you're putting together a budget Micro ATX build and just need a functional case to get started. Buy Now at Newegg
- Includes pre-installed 400W power supply
- Supports 240mm and 280mm AIO liquid coolers
- Features 2x USB 3.0, 2x USB 2.0 front ports
- Compatible with Micro ATX and Mini ITX motherboards
- Model: FBM-X5

Handy to keep around if you're frequently swapping components in a PC case, since these thumbscrews let you open and close panels without needing a screwdriver each time. Buy Now at Newegg
- 10-piece set UNC6-32 M3.5 hand screws
- Tool-free installation for PC components
- Durable design for PSU and GPU holders
- Compatible with standard computer cases
- Model: AB01

A straightforward way to replace a worn-out or noisy 90mm case fan without spending much, and it runs on standard 12V DC power so it slots into most desktop builds without any adapter or modification needed. Buy Now at Newegg
- 90mm axial cooling fan
- 12V DC power
- 0.16A power rating
- 90x90x25mm compact dimensions
- Model: TX9025L12S

A solid pick for builders who prioritize cooling headroom without a loud system, since the Pure Base 501 Airflow trades be quiet!'s typically noise-focused design for improved ventilation while still keeping acoustics in check. Buy Now at Newegg
- ATX full tower design supports ATX, Micro, Mini motherboards
- 1x USB 3.2 Gen 2 Type C front port
- 2x USB 3.2 Type A front ports
- Supports 2x 3.5 inch and 5x 2.5 inch drives
- Model: BGW74

A straightforward pick for anyone replacing a dead or noisy case fan, since 120mm is the most common size in desktop PC builds and 3-pin fans work with virtually any standard motherboard header. Buy Now at Newegg
- 120mm cooling fan size
- 12V DC power compatibility
- Low 25dBA noise output
- 3-pin connector interface
- Model: 12025

At $34, that's $26 off the $60 list price for a 120mm ARGB case fan that comes with a controller included, which saves you from buying one separately if you're building or upgrading a PC without a motherboard that has built-in RGB control. Buy Now at Newegg
- 120mm high airflow case fans
- 6-pack configuration for complete cooling
- Adjustable ARGB motherboard lighting
- Quiet operation design
- Integrated fan controller included

The O11 Dynamic EVO is a dual-chamber case built around a reverse-mounted motherboard layout, which gives you cleaner cable routing and room for a 420mm radiator on the side if you're planning a custom loop or large AIO build. At $169, that's $11 off the $180 list price. Buy Now at Newegg
- Dual tempered glass side panels for panoramic view
- Supports EATX, ATX, Micro-ATX, Mini-ITX motherboards
- Premium aluminum and steel construction
- Front panel USB 3.0 and audio connectivity
- Model: O11DERGBW

Handy if you're restoring an older desktop tower or building a budget PC with a case that's missing its front I/O panel, since it adds USB 2.0 ports, audio jacks, and power/reset buttons in a standard 5.25-inch bay slot. Buy Now at Newegg
- 2x USB 3.0 ports
- 2x USB 2.0 ports
- 5.25 inch case fit
- USB 3.0, 2.0, 1.1 compatible
- Black finish

Designed specifically for the HP Z440 workstation, this is a direct OEM replacement fan for keeping your front chassis cooling intact without guessing at compatibility. Buy Now at Newegg
- Compatible with Z440 Workstation
- Front chassis cooling fan assembly
- Model: 647113-001

Designed to actively cool exposed RAM modules, this is a niche pick for enthusiasts running high-frequency memory in warm cases where thermals are a concern, or for anyone who wants the ARGB lighting effect across their RAM sticks. Buy Now at Newegg
- ARGB lighting for customizable aesthetics
- Advanced thermal management for sustained performance
- Optimized cooling for professional and gaming workloads

A solid option if your PC case, CPU cooler, or small electronics project calls for a 60mm replacement fan, since Nidec makes reliable OEM-grade cooling components used across a range of commercial hardware. Buy Now at Newegg
- 60mm x 15mm DC 12V case fan
- Durable dual ball bearing design
- 3-pin power connector
- 60mm standard mounting size
- Model: D06R-12TH 35B 6015