
Using a SATA power connector to feed an 8-pin GPU is a workaround for systems where your PSU doesn't have enough dedicated PCIe cables, though it's worth knowing SATA connectors have lower power limits, so this is better suited for low-to-mid power graphics cards than high-end ones. Buy Now at Newegg
- SATA 15 pin male to 8 pin PCIe power
- Powers high-performance graphics cards from SATA
- 20cm cable length for flexible cable management
- Supports 6+2 pin GPU power configurations

A short DisplayPort extension cable like this is useful when your monitor's port is recessed or your existing cable just barely falls short of reaching your GPU. Buy Now at Newegg
- DisplayPort 1.4 high-bandwidth transmission
- Shielded design prevents signal interference
- Flat cable profile for easy routing
- Compatible with GPUs, laptops, and displays
- Model: P5A-P7B

Handy for builds where your power supply has fewer PCIe connectors than your GPU requires, letting you run dual 6+2-pin connections off a single 6-pin output. Buy Now at Newegg
- PCI-E 6-pin to dual 6+2-pin power splitter
- Powers two graphics cards from single power source
- Ideal for GPU mining rigs
- Extends reach for riser connectivity
- High-durability power extension cable

Handy for tight server rack or AV cabinet installations where a straight cord would strain the connector or block adjacent ports, the 90-degree plug keeps cables routed flat against the equipment. Buy Now at Newegg
- 90-degree angled C14 connector for tight spaces
- Extends reach between devices and PDUs or UPS
- Flush mounting design improves cable organization
- Supports up to 10A 250V power delivery
- Universal compatibility for 3-pin power devices

A longer power cord is useful when your monitor is positioned far from an outlet or when your current cable is too short to route cleanly behind furniture. Buy Now at Newegg
- Global 100-240VAC voltage compatibility
- Extended 10-foot power cord
- Integrated over-current and short-circuit protection
- FCC, CE, and RoHS safety certified
- High-quality, fully compatible replacement charger

Designed for enterprise and data center networking, this 40GbE QSFP+ transceiver handles intermediate-reach connections up to 1.4km over single-mode fiber, which suits IT teams looking to extend links between buildings or across a campus without pulling new cabling. Buy Now at Newegg
- 40Gbps data transfer rate
- QSFP+ form factor
- 1310nm wavelength
- 1.4km reach
- Model: JNP-QSFP-40GE-IR4

Useful if you're building or upgrading a PC and need an extra 8-pin power connector to reach your graphics card without stressing the original cable routing. Buy Now at Newegg
- 8-pin male connector for high-power GPU support
- 18AWG wire gauge for reliable power delivery
- Compatible with R720 R730 server hardware
- Supports K80 M60 M40 P40 P100 GPUs
- PCI-E power extension for graphics cards

Designed for short-range, high-speed connections between network switches and servers, this 10-meter direct attach copper cable is a cost-effective alternative to fiber optic transceivers when your equipment supports SFP ports and your runs stay within 10 meters. Buy Now at Newegg
- 10m length
- Direct Attach Copper cable
- SFP+ connectivity
- Low latency high-speed data transmission
- Model: QFX-SFP-DAC-10MA

A direct-attach copper cable for connecting 10GbE switches, routers, or servers at short distances, typically within the same rack or adjacent racks in a data center. Cheaper and lower-latency than optical transceivers, this is a straightforward buy if you're building or expanding a 10G network and need reliable short-run connectivity. Buy Now at Newegg
- 10GbE SFP+ Direct Attach Copper cable
- Support for 10Gbps data transfer
- Hot-swappable connectivity
- Low latency signal transmission
- Model: J9281D

Handy for GPU upgrades where your power supply only has one 8-pin PCIe connector but your graphics card requires two, saving you from buying a new PSU just to meet the power connector requirement. Buy Now at Newegg
- 8-pin to dual 8-pin GPU power cable
- Provides two additional PCI-Express power connectors
- Compatible with standard graphics card power requirements
- 20cm length for flexible cable management
- Enables power supply expansion for high-performance GPUs

Handy for older motherboards with an open 9-pin USB header, this cable lets you add two USB 2.0 ports to the back of your case without buying a new hub or PCIe expansion card. Buy Now at Newegg
- 9-pin motherboard header to 2 USB 2.0 ports
- Converts internal header to external USB connectivity
- Connects two USB devices to motherboard directly
- Simplifies internal cable management
- Provides two additional USB 2.0 interface ports

A short 90-degree C13-to-C14 cable is useful when you're working in a tight rack or cabinet where a standard straight cord would put strain on the connector or block airflow — the angled end lets you route cables closer to the wall or panel. Buy Now at Newegg
- 90-degree angled connector for tight spaces
- Extends power connection to PDUs or UPS
- Eliminates excess cable clutter
- 18AWG wire supports 10A 250V power
- Compatible with most 3-pin power devices

Useful for GPU riser builds or vertical GPU mounting setups where your graphics card needs to connect to a PCIe slot that isn't directly accessible on the motherboard, and the 4.0 spec means you won't bottleneck a modern card the way older 3.0 risers can. Buy Now at Newegg
- PCI-E 4.0 support for high-speed data transfer
- X8 to X16 interface compatibility
- 30cm flexible cable length for custom builds
- Optimized signal integrity for gaming GPUs
- Model: K83SF-SI

Handy for PC builders who need to run multiple case fans from a single motherboard header without adding a full fan controller. Buy Now at Newegg
- 1 to 3 PWM fan splitter cable
- 4-pin female to 3/4-pin male connectors
- Compatible with case and CPU fans
- Supports PWM fan speed control
- Simplifies fan power management

Handy for connecting 4-pin Molex PC fans to a USB port when you've run out of available power connectors on your PSU, or if you're powering a fan outside of a traditional PC build. Buy Now at Newegg
- Powers 4-pin fans from 5V USB ports
- Adapts Molex connections for USB power sources
- Compact cord for computer case fan management
- Enables USB-powered custom cooling solutions
- Model: N/A

A short flat patch cable like this is useful when you need a tidy connection between two nearby devices, like a router and a wall outlet, without a bulky round cable bunching up behind your setup. Buy Now at Newegg
- Category 5e standard with 1.0 Gbps data transfer
- Slim flat profile prevents cable tangles
- Snagless RJ45 connectors for durable connections
- Four pairs of stranded twisted copper wire
- Backward compatible with Cat5 network hardware

A short Cat6A patch cable works well for connecting a router to a modem, a PC to a wall port, or any device where you want a tidy, minimal-length run rather than coiling up excess cable. At $13, that's about $2 off the $15 list price. Buy Now at Newegg
- 10Gbps data transfer speeds
- Slim 30AWG pure bare copper wire
- Snagless RJ45 connector design
- Lifetime product warranty
- Model: 144503

Handy to have around if you're building or upgrading a PC and need to improve wireless signal strength, particularly when your motherboard's included antennas are underperforming or missing entirely. Buy Now at Newegg
- 2x internal Wi-Fi antennas for stable connectivity

Designed for 10 Gigabit Ethernet or SONET/SDH networking over multimode fiber, this SFP+ transceiver is a straightforward drop-in module for switches, routers, or server NICs that need a short-range optical link without the cost of buying OEM-branded hardware. Buy Now at Newegg
- 10 Gigabit data transmission speed
- Supports 400m reach on multimode fiber
- LC duplex connector interface
- Standard SFP+ form factor
- Model: FTLX8574D3BCL

Useful if your motherboard has limited fan headers but you need to run multiple case fans from a single connection, keeping them all synced to the same PWM speed signal. Buy Now at Newegg
- PWM fan hub connects five fans to one header
- Supports both 4-pin PWM and 3-pin fan connections
- Integrated LED RGB lighting with manual toggle switch
- 30cm sleeved cable for organized cable management
- Provides motherboard-controlled cooling for multiple fans