Expired Offers
expired
Amazon · 3 mos ago
$23
free shipping
more
↑ less
Features
- Dimensional accuracy: diameter variance of non more than 30 microns for consistent feeding and better 3D prints
- 3D Solutech PLA Filamet is compatible with nearly all 3D printers, including RepRap derivatives and those from MakerBot, Ultimaker, Bits from Bytes, Airwolf3D, Makergear, Printrbot and many others
- 3D Solutech engineered its professional 3D printer filament to strict tolerances and the highest quality standards, ensuring trouble-free operation with your 3D printer and superior results
- 3D Solutech pla filament is the choice of engineers, designers, and anyone else into 3D printing who demands the best
- Model: 3DSPLA175MNT
- UPC: 616241105468
-
Published 5/3/2022
Verified 6/7/2022 -
Popularity: 1/5
Related Offers
Amazon · 3 mos ago
ANYCUBIC PLA 3D Printer Filament, 3D Printing PLA Filament 1.75mm Dimensional Accuracy +/- 0.02mm,
$20 $24
free shipping
more
It's $4 under list price. Buy Now at Amazon
Features
- & Anycubic 3D Printer PLA filament of 1.75mm diameter, Minimum dimensional tolerance 0.02mm, which making filament outflow smoother, came out homogeneous. The low shrinkage, stable printing dimensions make the fusion between the layers was very good to obtain an even better bridging result. You don't worry the diameter changes a lot then the feed rate is disrupted with thicker and thinner layers at all
- & The 3D Printing PLA filament was neat on the roll and leaves the spool easily without any crossed turns. Resulting in less thread pulling and twisting, no clogging, super under-extruding. It produces the cleanest, least stringing prints of any of the filaments you have used whilst resisting warping and also providing the glossiest finish. Without a single jam and adhesion issue which meeting your demands for printing freely
- - & - Designed and Manufactured with Clog-Free patent to guarantee a smooth and stable printing experience with our PLA refills. Completely dried for 24 hours before packaging and vacuum sealed with desiccants in nylon re-bag, enable much smoother and more stable printing. Larger spool inner diameter design makes feeding smoother
- - & Made from starch raw materials derived from renewable plant resources, PLA filament boasts lower melting temperature, even does not need a heated bed. No odor, no pollution and non-toxic during the printing. Anycubic PLA Filament Compatible perfectly with most FDM 3D Printers and 3D Pens that use 1.75MM filament on the market, such as Prusa, Makerbot, MK3, Ender 3, CR 10, Kobra, Mega, Chiron, Monoprice FlashForge and more
- 1. Install the spool on the spool holder of a 3D printer, and preheat the nozzle of the 3D printer. 2. Cut the filament tip diagonally, and guide it through the extruder and feeding tube. 3. Manually push the filament through the feeding tube to the nozzle, until the filament melt through the nozzle. Note: When installing and changing filament, we highly suggest to preheat the nozzle firstly to reduce the nozzle block risk
- Model: FBA-D0166-New
Amazon · 4 wks ago
Monoprice 111043 PLA 3D Printer Filament - Blue - 1kg Spool, 1.75mm Thick | | For All PLA
$16 $21
free shipping
more
It's $4 under list price. Buy Now at Amazon
Features
- PLA is a good choice for a printing material if you are looking for high accuracy and high resolution.
- It extrudes at lower temperatures, does not require a heated base, and has a very low shrinkage rate (0.3%).
- This 1 kg spool features a thickness of 1.75mm 0.10mm, with a roundness variation of only 0.03mm.
- It has a nominal processing temperature of 210 C (410F).
- Thickness and roundness factors are laser measured at the factory to ensure accuracy over the entire length of the filament.
- Model: 111043
- UPC: 757901809798
Amazon · 1 mo ago
Monoprice - 133877 PLA Plus+ Premium 3D Filament - Red - 1kg Spool, 1.75mm Thick | Biodegradable |
$14 $30
free shipping
more
It's $16 under list price. Buy Now at Amazon
Features
- PLA Plus+ is a good choice for a printing material if you are looking for high accuracy and high resolution.
- This 1.0kg spool features a thickness of 1.75mm 0.10mm, with a roundness variation of only 0.03mm.
- It has a nominal processing temperature range of 205 ~ 225C (401 ~ 437F).
- Thickness and roundness factors are laser measured at the factory to ensure accuracy over the entire length of the filament.
- The negatives of using PLA Plus+ is that it is vulnerable to degradation from moisture, sunlight, and heat.
- Model: 133877
- UPC: 889028090602
Amazon · 3 wks ago
Inland Glass PLA 3D Printer Filament 1.75mm - Dimensional Accuracy +/- 0.03 mm - 1 kg Spool (2.2
$17 $25
free shipping
more
It's $8 under list price. Buy Now at Amazon
Features
- GLASS PLA FILAMENT SPECS: 1 KG (approximately 2.20 lbs) Spool 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.03mm)
- GLASS FILAMENT PRINT SETTINGS: Recommended Extrusion/Nozzle Temperature: 190C - 210C (374F - 410F) Recommended Bed Temperature: 60C -80C (140F - 176F) Spool Diameter: 8.81 in. (223.77 mm) - Spool Width: 2.81 in. (71.37 mm) - Spool Hub Hole Diameter: 2.00 in. (50.80 mm)
- INLAND GLASS PLA FILAMENT: Designed with the highest quality and compatibility in mind, Inland Glass PLA Filament undergoes numerous testing procedures to ensure that you spend less time troubleshooting and more time printing! Your filament will arrive completely dried and vacuum sealed with desiccant to ensure a high-quality smooth print.
- EASY-TO-USE: The Inland Glass PLA filament melts evenly and feeds smoothly into your 3D Printer creating defined corners with minimal warping and no odor. Produce your best print with our no-clog, bubble-free filaments. Inland filament can be used with most 1.75MM FDM and FFF 3D Printers. To keep your filament tangle free do not let go of the filament on the spool! Always hold the spool and filament tightly, do not allow your filament to spring back.
- HIGH-QUALITY GLASS PLA: Glass PLA filament is non-toxic, the material has good toughness and strength. This material has a low shrinkage rate, and a uniform diameter for clean, even prints. You can expect a transparent print with Glass PLA.
- Model: GlassGlitterFil
- UPC: 618996737505
Amazon · 5 days ago
Flash Furniture Flash Fundamentals Mid-Back Gray Mesh Swivel Ergonomic Task Office Chair with Arms
$66 $149
free shipping
more
It's $83 under list price. Buy Now at Amazon
Features
- Purchase new computer chairs for your team without breaking the bank. These mesh back desk chairs keep you cool while concentrating on work.
- [_Our chair conforms to ANSI/BIFMA standard X5.1-17_] Contemporary task chair with ergonomic lumbar support
- Mesh comfort: designer ventilated back provides maximum breathability
- Pneumatic seat height lever, dual-wheel casters.PRODUCT MEASUREMENTS: Overall Size: 24.75"W x 24.75"D x 34-38.5"H; Seat Size: 19"W x 18"D x 17-21.5"H; Back Size: 18"W x 17.5"H; Arm Size: 23.75-28.5"H from floor; 6.75"H from seat
- Note: To ensure proper assembly, please follow all steps provided in the User manual (provided in pdf below)
- Model: LF-118P-T-GY-GG
- UPC: 889142530886
Amazon · 1 wk ago
Black + Decker Dustbuster Cordless Handheld Vacuum
$24 $30
free shipping
more
It's $6 under list price. Buy Now at Amazon
Features
- MULTI-SURFACE USE Removes hair, dirt, and debris from carpets, car interiors, furniture, and high-traffic areas.
- LIGHTWEIGHT AND PORTABLE Easy to carry and maneuver, even in tight spaces.
- STRONG SUCTION Cordless vacuum delivers up to 2x more suction power for a deeper, more thorough clean.* (*8V MAX* vs. HNV115 4V MAX* based on ASTM F558.)
- BUILT-IN CREVICE TOOL Accesses hard-to-reach areas like between couch cushions and on top of shelves.
- EASY-VIEW DIRT BOWL Translucent, bagless dirt bowl empties easily for simple debris disposal.
- WASHABLE DIRT BOWL AND FILTER Can be cleaned right in the sink.
- CORDLESS CLEANING Powered by a lithium ion battery, this handheld vacuum is ideal for larger jobs requiring quick cleanup.
- WALL MOUNT Provides simple storage and convenient charging in one place.
- INCLUDES (1) HNVC215B10 hand vacuum, (1) wall-mountable base charger, (1) on-board crevice tool, (1) washable filter (HNVCF10).
- Model: HNVC215B10
- UPC: 885911610681
Amazon · 1 day ago
ELEGOO Mars 3 Resin 3D Printer, 4K Mono 6.66 Inch LCD MSLA UV 3D Printe, Speedy Printing and High
$286 $358
free shipping
more
It's $72 under list price. Buy Now at Amazon
Features
- 6.66 Ultra 4K Mono LCDEquipped with 6.6 4K monochrome LCD, Mars 3 Pro can prints out works at 35m super high XY resolution. Build Volume 14389175mm/5.623.56.8in, 40% larger than Mars 2. A protective film is installed on the LCD to prevent resin leakage from damaging the screen
- High-End COB Light SourceNew generation COB light structure is designed with 36 units LED lights, a free-form surface lens and a Fresnel lens, powerful and reliable, resulting in 92% and more uniform UV distribution for higher printing accuracy
- Comfortable Printing ExperienceBuild-in activated carbon reducing bad odor of resin, offer you a more comfortable and fresh experience. ATTENTION USB port next to the vat is for odor reducing facility ONLY
- For Better Printing ResultsUpgraded Z-axis linear railway make a more stable and accurate moving, ensuring you will get reliable and consistent results. Comes with 2 extra FEP films 2.0, help the prints stick nicely to the build plate and protect small supports from broken, improve completeness of your prints
- ELEGOO Authorized DistributorYou will receive ELEGOO Mars 3 Pro, tool kit and 2 extra FEP films as bonus, 1-year warranty on the whole printer for quality problems(LCD screen, FEP film, and tool kit excluded), professional technical support and friendly customer service
- Model: US-OP-3D-M3
Alerts
Edit Alert-
Enable alerts for this product
Price Analysis
| Discount | Last Deal Price | Current Price | ||
|---|---|---|---|---|
| Amazon | $23 (exp 1 mo ago) | -- | Check Price |
Sign In or Register